Desktop 3-in-1 Ionic Air Purifier with HEPA Filter ITEM: 357221 INSTRUCTION MANUAL PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE 1
Getting Started Remove the product from the box. Remove any packaging from the product. Please retain all packaging after you have checked and counted all the parts and the contents against the list.
5. We do not recommend the use of an extension cord, as it may overheat and become a risk of fire. 6. Never use the power cord to pick up, carry, drag, pull, or lift the appliance. Do not pull the cord against sharp corners and edges. This could result in injury to the user or damage to the cord. 7. Unplug the appliance before cleaning or making any repairs or servicing. 8. Exercise caution and use reasonable supervision when appliance is used near children. 9.
Description of Parts INSTRUCTIONS FOR USE Note: 1. The ion booster generates millions of negative ions making the air purer and fresher. 2. The 2-speed fan setting lets you select the desired air purification level. 3. 360° inlet ensures sufficient airflow through the appliance. 4. Replace the HEPA filter every 6 - 9 months of usage. Operating instructions 1.
Insert the output end of supplied adapter into the input jack at the bottom of the appliance (see above image). Make sure the filter and the bottom cap are fully assembled, then place the appliance on a flat surface. Plug the adapter into a power outlet. 2. Turn on/off and settings Once the appliance is plugged in, the LED indicator light around the power button will turn red indicating the appliance is in ‘standby’ mode.
Troubleshooting Problem Possible Cause Solution The LED indicator The adapter is not properly connected Check if the adapter power cable is light does not turn to the appliance. correctly inserted into the bottom of red to show standby mode after the the appliance. Replace the adapter. The adapter is damaged appliance is plugged in. On switching to the The outlet airflow is being blocked by Clean the outlet of anything blocking high mode setting, something.
the interference by one or more of the following measures : - Reorient or relocate the receiving antenna. - Increase the separation between the product and receiver. - Connect the product into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. The device complies with Part 15 of the FCC Rules.
SERVICE AND REPAIR: If service is required for this product, you should first contact Nuvomed Inc. Customer Service at info@nuvomed.us or by calling 1 (866) 815-4714, Monday to Friday 10am to 6pm EST. NOTE: Manufacturer cannot assume responsibility for loss or damage during incoming shipment. As a precautionary measure, carefully package the product for shipment, and insure it with the carrier.