User Manual

Delete Memory
Delete Memory
When “dEL” is flashing and a “ ” symbol appears on the
screen, press M to delete all the memory. “___” will flash
three times and screen will auto off.
Setting of Alarm
You may set up any or all of the alarms (1 - 4).
When “dEL” is flashing and a “ ” symbol appears on the screen, press S to
set the alarm.
When the “OFF” or “On” and “ ”
symbols appear on the screen, press M to
turn on or off the first alarm.
Press M to select on, press S to set the hour.
When the hour
flashing, press M to
add an hour. When the
correct hour is set,
press S to confirm.
When the minute flashing,
press M to add one minute.
Hold M longer to add
minutes faster.
When the correct minute is
set, press S to confirm and
go to the next alarm.
If you do not wish to set an alarm, press S to
skip this step.
If you wish to turn off an alarm, find the
alarm number by pressing S in the setting
mode, press M to change from “ON” to
“OFF”
At the time of your alarm setting, the monitor will beep and automatically turn on.
If you do not want to test at this time, press S again and again can skip setting alarms and
screen will finally off. If you do not press S, the monitor will switch off after 2 minutes.