User Manual
Table Of Contents
Before Taking a Measurement
For most accurate results, measurements should be taken in the same
circumstances and at the same me every day.
This device can be applied to either arm, but preferably the le. Use the same arm
for each measurement.
Any blood pressure recording can be affected by the posion and physiological
condion of the subject, as well as other factors such as background noise, stress,
talking and body movement etc.
Avoid taking measurements while under stress.
Do not eat, drink alcohol, smoke, exercise, or bathe 30 minutes before using this
device, as these acvies may change blood pressure.
For an accurate indicaon of true blood pressure, take and record several
measurements over a period of me.
If consecuve measurements are desired, allow two minutes between uses to allow
blood to flow through the arm normally.
This device is used to monitor blood pressure. However, it cannot treat or prevent
high blood pressure. If you suffer from high blood pressure, consult your doctor.
Self-diagnosis and treatment using readings may be dangerous. Follow the
instrucons of your physician or licensed healthcare provider.
Measurement
1. This device should be used on bare skin. If necessary, loosely roll up your sleeve to
expose arm.
Note: your arm cannot be ghtened by your sleeve.
2. With the hose down the inside of your arm and the boom of the cuff approx. 1-
2cm above your elbow, wrap the cuff around your arm. Secure the cuff with a finger
space between the cuff and your arm by aaching hook-and-loop fastener.
3. Comfortably seated
Legs uncrossed
Feet flat on the floor
Back and arm supported
Relax as much as possible and
do not talk during the measurement.