Desktop Air Purifier ITEM: 385408 INSTRUCTION MANUAL PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE 1
Getting Started Remove the product from the box. Remove any packaging from the product. Please retain all packaging after you have checked and counted all the parts and the contents against the list.
Warning Check if the voltage indicated on the appliance corresponds to the local power voltage before you connect the appliance. Do not use the appliance if the plug, the power cord, or the appliance itself is damaged.
Do not use this appliance when you have used indoor smoke-type insect repellents or in places with oily residues, burning incense, or chemical fumes. Do not use the appliance near gas appliances, heating devices or fireplaces. Always unplug the appliance after use and before cleaning or carrying out other maintenance. Do not use the appliance in a room with major temperature changes, as this may cause condensation inside the appliance.
INSTRUCTIONS FOR USE Control Panel 1. Connect the power supply. 2. Set your desired function according to following functional description – Screen display Operation Short Press ON/OFF button to turn on/off the unit. Short Press the “Sleep” button to turn on/off the sleep mode. a. Green light illuminates, when it is on sleep mode. b. Press any button to close the sleep mode. Long Press “Child Lock” button for 3 seconds to on child lock mode, green light illuminates a.
Cleaning & maintaining your Air Purifier Always make sure the appliance is turned off and unplugged before cleaning. 1. In order to extend the filter life, the filter should be exposed to sunlight periodically in order to release the harmful gas and odor, and at the same time, to kill bacteria. 2. Do not place the filter close to high temperature to avoid disfiguration or fire. 3. Only use the original Nuvomed filter specially intended for this appliance. Do not use any other filter.
Cleaning the surface of the housing 1. Turn off the appliance and unplug the unit from power supply. 2. Use a soft cloth to clean the surface of the housing. Troubleshooting Problem Possible Cause Solution Unit does not power The unit is not properly connected to Check if the power cord is correctly on power source. connected to the power source. The unit is not turned on. Turn on the unit. If any parts not install properly. Please contact the supplier for help. Impurities inside.
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
WARRANTY PERFORMANCE: During the above 30 days warranty period, a product with a defect will be either repaired or replaced with a reconditioned comparable model (at manufacturer's option). The repaired or replacement product will be in warranty for the balance of the 30 days warranty period and an additional one-month period. No charge will be applicable for such repair or replacement. SERVICE AND REPAIR: If service is required for this product, you should first contact Nuvomed Inc.