INFINITY BLENDER TM Owner’s Manual Model 28202 Questions or Concerns? Toll Free: 1-877-689-2838 • help@nuwavenow.
TABLE OF CONTENTS Welcome to the NuWave® Family! Owner’s Manual Important Safeguards .................................................................... Parts & Accessories ....................................................................... Assembly Guide ............................................................................. Quick Start ..................................................................................... Instructions.............................................................
ER ST REGI OW! for an additional N As a special thank-you for registering your NuWave® Infinity™ Blender, you’ll automatically receive an additional 12 months added to your limited manufacturer’s warranty!* All you have to do is follow these simple steps. 1 Using your smartphone or smart device, scan the QR code located on the back of the Infinity™ Blender.
IMPORTANT SAFEGUARDS HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS BEFORE USE 2. Close supervision is necessary when any appliance is used near children. The Infinity™ Blender is not intended for use by children, persons with reduced physical, sensory, or mental capabilities or those with lack of expertise or knowledge of this unit. 3. Avoid contact with moving parts. 4. Do not operate the Infinity™ Blender with a damaged cord or plug, if the appliance malfunctions, is dropped, or damaged in any manner.
IMPORTANT SAFEGUARDS HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS BEFORE USE ™ DO NOT USE THE INFINITY BLENDER FOR OTHER THAN ITS INTENDED USE. Note: Put the Infinity™ Blender on a surface that is horizontal, even, and stable. This appliance is intended for normal household use.
PARTS & ACCESSORIES ASSEMBLY GUIDE ENGLISH Lid Lock 1 Lid Lock Plunger Cap Part #: MXA4 2 Plunger Lid Part #: MXA3 2 3 3 4 Jar Plunger Lid Seal Ring (comes assembled onto Lid) Part #: MXP2 4 Jar with Blade Part #: MXA1 5 Blender Base Part #: MXA15 6 Plunger Part #: MXA6 7 Silicone Pad Part #: MXA21 6 5 Plunger Lid Parts & Accessories 1 The Plunger Cap is removed when adding additional ingredients while blending.
ASSEMBLY GUIDE QUICK START 0 ENGLISH WARNING WARNING: As with most electrical appliances, electrical parts are live even when the Infinity™ Blender is off. Make sure the Infinity™ Blender is unplugged when assembling. Quick Start Using the Plunger Remove the Plunger Cap from the Plunger Lid before inserting the Plunger. The Plunger Lid is designed with the hole opening so that the Plunger does not come into contact with blades when moving ingredients around.
INSTRUCTIONS Notes: • When blending for a long period of time liquids may become hot and steam may escape from the Plunger Cap. Getting Started 1. Turn the red main Base Power Switch ON. Switch is located on the right side of Blender Base. • The Power button will flash. Note: The lowest setting is #1 (5,000 RPM). The highest setting is #10 (17,000 RPM). Icon settings are for specialized blending tasks. Each icon setting has default time and RPM built in.
• The display will show the default time for the function you have selected. Once the button is released, blending will end. • The percentage of power used can be adjusted by holding Pulse 1 and rotating the dial. • The percentage will change in 10% increments. Hold the Up and Down buttons to move percentage points faster. 2. Press Pulse 2 for short bursts of blending at high power (100% Power). • Press and hold Pulse 2 for continuous blending. Once the button is released, blending will end.
TROUBLESHOOTING GUIDE Before First Use Wash all removable parts in warm, soapy water or in the dishwasher, top rack only. The Jar can be washed using the Clean function. See “Instructions” for details. Silicone Pad Removal It may be necessary to remove the Silicone Pad for occasional cleaning or to replace the part if it becomes worn or damaged. To remove: 1. Lift up one corner of the Silicone Pad.
1. Certain ingredients can cause clogging. When using the Plunger Lid, remove the Plunger Cap from the Lid and insert the Plunger through hole. Press the ingredients down and around until mixture loosens around the bottom of the Jar. 2. The ingredient amounts higher than specified are being used. Do not fill the Jar above ¾ capacity (1.5 liters, 51 fl oz). 3. Large pieces of ice are not mixing properly. Use smaller pieces of ice. The blended mixture has lumps or the texture is not even.
TO OBTAIN SERVICE The owner shall have the obligation and responsibility to: pay for all services and parts not covered by the warranty; prepay the freight to and from Service Department for any part or system returned under this warranty; and carefully package the product using adequate padding material to prevent damage in transit. The original container is ideal for this purpose.
LIMITED WARRANTY LICUADORA INFINITY TM Manual del Propietario Modelo 28202 ¿Preguntas o Inquietudes? Sin costo: 1-877-689-2838 • help@nuwavenow.
SE STRE Í G E R ¡ ! A R O AH Como agradecimiento especial por registrar su NuWave® Infinity™ Blender, ¡recibirá automáticamente 12 meses adicionales a su garantía limitada del fabricante!* ¡para una garantía 12 adicional de meses! DESCARGUE LA APLICACIÓN QR CODE EN SU DISPOSITIVO MÓVIL 1 Usando su teléfono inteligente o dispositivo inteligente, escanee el código QR ubicado en la etiqueta de su producto en la parte posterior de el Infinity™ Blender.
MEDIDAS DE SEGURIDAD IMPORTANTES IMPORTANT SAFEGUARDS HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS BEFORE USE Bienvenido a la familia NuWave ® PARA USO DOMÉSTICO SOLAMENTE Y LEA TODAS LAS INSTRUCCIONES ANTES DE USARLO Queremos asegurarnos de que aproveche al máximo su experiencia de cocina Infinity™ Blender, por lo que hemos proporcionado instrucciones detalladas aquí en este manual para que conozca todos los detalles para ser un cocinero casero exitoso de NuWave®.
10. ¡PRECAUCIÓN! Las cuchillas son afiladas. Manejar la licuadora con cuidado. No manipule las cuchillas. MEDIDAS DE SEGURIDAD ADICIONALES VER LA LIMPIEZA Y MANTENIMIENTO ANTES DE USAR 12. La alteración o modificación de cualquier parte de la licuadora o el uso de accesorios no recomendados por el fabricante puede causar incendios, lesiones o daños a la propiedad.
MEDIDAS DE SEGURIDAD IMPORTANTES PARA USO DOMÉSTICO SOLAMENTE Y LEA TODAS LAS INSTRUCCIONES ANTES DE USARLO NO UTILICE LA UNIDAD PARA OTRO USO QUE NO SEA EL PREVISTO. Nota: Coloque el Infinity™ Blender en una superficie que sea horizontal, uniforme y estable. Este aparato está diseñado para uso doméstico normal.
PARTES Y ACCESORIOS GUÍA DE MONTAJE Tapón del Émbolo 1 Tapa del Émbolo Bloqueo de la tapa 2 Guía de Montaje La Tapa del Émbolo y el Tapón del Émbolo se usan cuando se agregan ingredientes adicionales mientras se licua. 3 4 1 Tapón del Émbolo Parte #: MXA4 2 Tapa del Émbolo Parte #: MXA3 3 Anillo de sello Parte #: MXP2 Ensamble de la Tapa del Émbolo 1. Alinee el punto rojo en la Tapa con el mango. 4 Jarra con Cuchilla Parte #: MXA1 2.
GUÍA DE MONTAJE INICIO RÁPIDO Al usar el Émbolo Retire el Tapón del Émbolo de la Tapa antes de insertar el Émbolo. 0 La Tapa del Émbolo está diseñada con la abertura del orificio para que el Émbolo no entre en contacto con las cuchillas. Cuando no use el Émbolo, coloque el Tapón en la Tapa presionando hacia abajo. ESPAÑOL Embolo 2 Los ajustes y los tiempos se pueden ajustar antes y durante el proceso de fusión. Presione las flechas hacia arriba y hacia abajo para establecer o ajustar.
INICIO RÁPIDO INSTRUCCIONES Notas: • Al mezclar durante un largo período de tiempo, los líquidos pueden calentarse y el vapor puede escapar de la tapa del émbolo. Consulte el manual para más. Empezando Encienda el interruptor de alimentación de la base principal rojo. El interruptor está ubicado en el lado derecho de la base de la licuadora. • El botón de encendido parpadeará. 2. Presiona el botón de Encendido una vez para encender tu Infinity™ Blender.
40 instrucciones Ícono Predeterminado Min : Seg Min. Max. Notas 1-10* 03:00 00:05 05:00 Velocidad ajustable Hielo 00:15 00:05 02:00 Bebidas a base de hielo Zalamero 00:35 00:05 02:00 Bebidas congeladas Sorbete 00:30 00:05 02:00 Postres congelados Mermeladas 01:30 00:05 02:00 Cremas Sopa 03:00 00:05 05:00 Sopa y chocolate caliente Limpiar** 00:15 00:05 02:00 Autolimpieza ESPAÑOL 1. Presione Pulse 1 para ráfagas cortas de licuado a baja potencia (25% de potencia).
PRECAUCIÓN Las piezas móviles pueden calentarse con el uso prolongado. NO TOCAR. ADVERTENCIA: Como ocurre con la mayoría de los electrodomésticos, las piezas eléctricas están en funcionamiento incluso cuando el Infinity™ Blender esté apagada. Asegúrese de que la unidad esté desconectada durante el montaje. Antes del primer uso: Lave todas las piezas extraíbles con agua jabonosa tibia o en el lavavajillas (sólo en la rejilla superior). La Jarra se puede lavar con la función Clean.
GUÍA DE RESOLUCIÓN DE PROBLEMAS La mezcla licuada tiene grumos o la textura no es pareja. 2. El Interruptor de encendido rojo en el lado derecho de la Base puede no estar encendido. Verifique si el Interruptor está encendido. La Licuadora no funciona aún cuando está conectada y el Botón e Interruptor están encendidos. 1. La Tapa de la Jarra no está colocada correctamente.
El cliente debe registrar su Licuadora de Alto Rendimiento NuWave® Infinity™ dentro de los seis (6) meses posteriores a la fecha de compra para ser elegible para la cobertura de la garantía. El cliente puede registrarse escaneando el código QR en la parte posterior de la unidad, o visitando www.nuwavenow.com/qr. Si el cliente no registra su unidad dentro de los 6 meses posteriores a la compra, la garantía será anulada.
GARANTÍA LIMITADA El laudo del árbitro será vinculante y podrá presentarse como un fallo en un tribunal de jurisdicción competente. El arbitraje se llevará a cabo de conformidad con las disposiciones de las Reglas de arbitraje comercial de AAA y los Procedimientos de mediación vigentes en el momento de la presentación de su solicitud de arbitraje. Ver https:// www.adr.org/sites/default/files/CommercialRules_Web.pdf.
REPLACEABLE PARTS To order replaceable parts, head to NuWaveNow.com Part Description Plunger Lid Covers jar. Used for blending tasks. MXA3 Plunger Lid Seal Ring Located under the rim of Plunger Lid. Provides seal while blending. MXP2 Plunger Cap Located on top, in center of Plunger Lid. Removed to pour in oil, etc. Provides opening for Plunger. MXA4 Jar with Blade Where ingredients are placed. Clear container with stainless steel blades attached inside. Part No.
FOR HOUSEHOLD USE ONLY 120V, 60Hz, 1500 Watts Model: 28202 Rev. 1 For patent information please go to: www.nuwavenow.com/legal/patent Designed in France & Developed in USA NuWave LLC 560 Bunker Ct. Vernon Hills, IL 60061, U.S.A. Tel: 1-877-689-2838 Mon - Fri 7:30 am to 4:30 pm (CST) Email: help@nuwavenow.com Made in China ©2022 NuWave LLC • All Rights Reserved. Item No: BM28202 Rev.