Full Product Manual

14 • NuWave
™
PIC
®
Double Complete Cookbook
Wattage Function:
The PIC Double operates on a default of 1800 watts when using one plate.
1. To change the wattage to 900 watts, press the “1800W” button and light will turn off.
2. To change to 1800 watts, simply press the “1800W” button again and the light will turn on.
NOTE: EACH PLATE CAN USE UP TO 1800W INDIVIDUALLY. WHEN USING BOTH
PLATES, THE PIC DOUBLE WILL AUTOMATICALLY SWITCH TO 900W ON EACH PLATE.
Setting Cooking Temperature:
The NuWave™ PIC Double is defaulted to cook on Med/High (375°F).
• To start, press temperature key “Low” - “Max/Sear,” the TEMP indicator will ash, then press
“Start.” The temperature range will appear on the display panel.
• To start, press the “Cook Temp” button. The TEMP indicator will ash and 375F will be displayed.
To raise or lower the temperature in 5°F increments, press the “+” and “-” buttons until desired
temperature is displayed.
Refer to chart below for setting temperature and preset temperatures.
The minimum temperature is 100°F while the maximum temperature reaches 575°F.
NOTE: Display temperature represents temperature of 1.5L of oil in the NuWave™ 3.5-quart Stainless
Steel Pot. Thermometer location for test at the origin (middle) of the NuWave™ 3.5-quart Stainless
Steel Pot and an equidistant length between the pot base and top of the oil.
100°F (38°C)
175°F (79°C)
275°F (135°C)
375°F (191°C)
425°F (218°C)
575°F (302°C)
Press Button Range Temperature Examples
Low
Med Low
Med
Med High
High
Max/Sear
Warm
Simmer
Steam
Stir/Deep Fry
Boil/Saute
Sear
100F / 38C
175F / 79C
275F / 135C
375F / 191C
425F / 218C
SEAR
Panel Display
Desired
Temp
Display
220°F
221°F
222°F
223°F
224°F
225°F
220F
220F
220F
225F
225F
225F
Setting Temperature Continued:
The desired cooking temperature can be set by pressing the
numeric touchpad. See right for examples.
1. Press “Cook Temp” button.
2. Press a desired cooking temperature by using the numeric
touchpad. If a number not ending in “5” or “0” is entered, the PIC
Double will automatically set itself to the nearest temperature ending
in a “5” or “0”. For example, when you press “2,2,2” for cooking at
222ºF, the LED display will read 220F.
three times, then press “Start”
press
Fahrenheit to Celsius Conversion:
1. The NuWave™ PIC Double’s LED display is defaulted to display cooking temperature in
Fahrenheit (F) and the F will appear on display panel.
2. To switch the display to Celsius (C), press the “Cook Temp” and “Cook Time”
buttons simultaneously.
3. To close out of the F/C conversion option, press the “Pause/Clear” button until “0”
or the current time appears on the unit’s screen.
• Each control panel can be changed from Fahrenheit/Celsius individually.
Lock And Unlock Function:
The PIC can be locked by pressing
“Low” and “Max/Sear” simultaneously until
“LOCK” is displayed on the LED display.
To unlock, press “Low” and “Max/Sear”
simultaneously until “LOCK” is no longer displayed on the LED display.
• Each control panel locks and unlocks itself independently from the other.