Full Product Manual

16 • NuWave
™
PIC
®
Double Complete Cookbook
End Time Function:
IMPORTANT: the correct “CLOCK” time must be set before “END TIME” function can be used
(see “Setting Clock Time” on page 13). This feature is designed to allow cooking to end at a specic
time. It is possible to delay the end of a program for up to 24 hours.
1. Press the “End Time” button, “END TIME” indicator will ash
on LED display with AM and “00:00” being displayed.
2. Use the numeric touchpad to input the desired end time.
• For example, 5:00 would be entered by pressing “5,0,0”.
Press “am/pm” button to change from “AM” default if appropriate.
3. After programming the cooking temperature and time, press “Start”.
NOTE: “COOK TIME” cannot overlap with the “END TIME”.
Programming Function:
NOTE: Numbers 1-50 are pre-programmed recipes.
NOTE: Numbers 51-200 are your own programmed recipes.
See Programmable Recipe Example.
NOTE: Programs 1-50 – wattage is automatically set for 1800 watts, if you are using programs 1-50
and you press the “1800W” button it will display “Err” and default back to cook temperature.
NOTE: Programs 51-200 – after you program your appropriate wattage, you are not able to change
the wattage unless you override the programmed recipes. If you press the “1800W” button while
cooking it will display “Err” and default back to cooking temperature.
The “Program” button represents a variety of functions available to users of the NuWave™ PIC
Double, including Memory Entry (the storage of frequently used stage cooking programs), Memory
Recall (retrieval of stage cooking sequences), and Stage Cooking Mode.
Using Pre-Programmed Recipes:
1. Press the “Program” button. “PROG” indicator will
ash and “0” will appear on the display screen.
2. Enter the number associated with the pre-programed
recipe using the numeric touchpad. Exp “3,1” is 31.
3. Then press “Start”.
Programming Your Own Recipes:
1. Enter your stages with temperatures and times,
then press “Program”. Enter the number you wish
to save it as. Exp: “1,3,7” is 137.
2. Press the “Program” button to conrm
the number you selected.
• Up to 10 cooking functions can be stored with each Memory Entry
(10 additional stages of cooking time and temperature).
• If you are unsure of the remaining cooking time at the current stage while the
NuWave™ PIC Double is cooking, press “Cook Time” to display the remaining time.
The display will automatically revert to the cooking temperature after several seconds.
Total Cooking Time:
Before starting a programmed recipe, you can view the total number of cooking stages and
total cooking time.
1. Press the “Program” button, then enter the appropriate recipe number on the numeric touchpad.
2. Then press the “Program” button again.
• The total number of cooking stages will be displayed above “STAGE” and the total
cooking time will be displayed on the LED display.
NOTE: Individual stages may also be edited and saved when displaying the total cooking time.
1. Press the “Stage” button to select which stage to edit.
2. To change the temperature press the “Cook Temp” button and enter the desired temperature
using the numeral keys or the “+” and “-” buttons. To change the time, press the “Cook Time”
button and enter the desired time using the numeral touchpad or the “+” and “-” buttons.
3. Press the “Start” button to begin your edited recipe.
NOTE: You can also save your edited recipe.
1. Press the “Program” button, and “PROG” will ash and a “0” will show on the screen.
2. Enter the desired number for your program using the numeral touchpad or the “+” and “-” buttons.
3. Press the “Program” button again to save your new program.