Use and Care Manual

11
OPERATING INSTRUCTIONS (Continued)
5
Once the lid is locked in place the Pressure Release
Valve should be level.
To manually release pressure, slowly turn the
Pressure Release Switch counterclockwise.
Steam can be extremely hot, take precautions
to prevent any injury.
6
Plug the NuWave Nutri-Pot
™
Electric Pressure
Cooker into an electric power supply. The LCD
display will show “--:--” and the unit will go into
standby mode.
Pressure
Release Valve
Operating Instructions
Silicone Gasket Installation
SILICONE GASKET INSTALLATION
Removal
Installation
MAKE SURE THE SILICONE GASKET HAS NO CRACKS OR IS IN
ANYWAY DAMAGED.
Remove Inner Lid from the Pressure Cooker.
• Rotate counter clockwise, this will detach the Inner Lid.
• With one hand holding the Inner Lid down, gently pull the Silicone Gasket up.
Installing the Silicone Gasket
• Line up the Silicone Gasket on top of the metal ring.
• Gently push the Silicone Gasket making sure you see the metal ring is inside
the Silicone Gasket’s groove. Continue pushing the Silicone Gasket all around.
Pressure
Release Switch