Use and Care Manual

11
Owner's Manual
OPERATING INSTRUCTIONS
Before Use:
1. Remove all the packaging materials.
2. Remove the glue and labels on the appliance.
3. Clean the Fry Pan Basket, Base Tray, thoroughly with hot water, a nonabrasive
sponge and a mild dish detergent, or in the dishwasher, top rack only.
4. Wipe the inside and outside of the appliance with a wet cloth. Do not
immerse the appliance in water.
Note: This appliance cooks using hot air. DO NOT ll the basket with oil.
Operation Preparation:
1. Place the appliance on a level, even, and stable heat-resistant surface.
2. Place the Base Tray and Fry Pan Basket in the NuWave Brio Healthy
Digital 6-Qt. Air Fryer.
3. Plug the appliance into a standard wall socket. The power plug is included in
the package.
Note: Do not cover or block the vent located on the back of the NuWave Brio
Healthy Digital 6-Qt. Air Fryer. Doing so can prevent proper ventilation and will
adversely affect the cooking results.
Operation Functions - On/Off Function:
Press “On/Off” button once to turn the unit on. The control panel
should display “0” indicating that no cooking time or temperature
has been selected and the unit is powered on. Press “On/Off” button
again to turn the unit off.
Wattage Function:
The default wattage of the NuWave Brio Healthy Digital 6-Qt. Air
Fryer is 1800 watts. To change the wattage, press “Watts” once.
The red light will illuminate above “900” indicating that the NuWave
Brio Healthy Digital 6-Qt. Air Fryer is now set to 900 watts. Press
“Watts” once more and the red light above “1500” will illuminate,
indicating the NuWave Brio Healthy Digital 6-Qt. Air Fryer is now set
to 1500 watts. Press “Watts” again and the red light above “1800” will
illuminate, indicating that the NuWave Brio Healthy Digital 6-Qt. Air
Fryer is now set to the default 1800 watts.
If you change the wattage from the default 1800W to either 900W or
1500W and unplug the unit, the NuWave Brio will remember the last
wattage setting when you plug it back in.
WATTS