User Manual

16
Owner’s Manual
FUNCTIONS FOR THE NUWAVE BRUHUB
TM
(CONT.)
Size selection function:
This lets you choose your amount of beverage you would like brewed.
1. Default is set for “8”, which is 8 ounces.
2. Press the “size selection” button once and the blue light next to
“12” will be lit.
3. Press the “size selection” button again to change the selection to
“half carafe”, “carafe”, and back to “8”.
• Refer to Insert & Beverage Selection Charts for
more information.
Brew function:
Once you have hit “Power” to turn the unit on, have chosen your
selection of beverage, and size, you can now brew.
1. Press the “brew” button.
• There will be a red light next to “preheating” button. Once unit
has preheated, the red light will turn off, indicating the water
is ready to brew and unit will start brewing.
• Unit will beep when the brew is complete.
• DO NOT lift lid during brewing cycle. You must wait until brew
cycle is nished.
2. To stop the brewing function, press “brew” button again.
NOTE
• Appliance will not preheat or brew if lid is not fully closed.
size
(oz)
brew
Coffee/Hot Water selection function:
This lets you select your favorite beverage with the push of a button.
1. Default is set for “regular”.
2. Press the “beverage selection” button once and the blue light
next to “bold” will be lit.
3. Press the “beverage selection” button again to change the
selection to “iced”, “hot water”, or back to “regular”.
• When “iced” is selected, half of the amount will be dispersed.
For example, instead of 8oz, 4oz will be brewed, making the
beverage more concentrated.
• Refer to Insert & Beverage Selection Charts for
more information.