Gage Cp 201 Gt Twn Go tte oau A 0 Tm Low Pn tbc of Cot Toy CO tet es itn carrion eX cr Whit ovary afr has bound 0 kre th acre xd canon of rl, Chan Technology Co. le no interceptions orientates ogling te contra. IMPORTANT SAFETY INSTRUCTIONS. SECTIONING, READ INSTRUCTIONS RIE ric tsk of or sat she, tr ces | COMM: To occ rio osc sok, dot ros ‘His apple fo ran mos. va. Ho ne antarctic Dr eke, eh birdcage 0 quaffed CAR Th paper ha bow atc ar wv Cody wit Bm rks or a Cs shale dead pursuit 1 of CC Pu's.
Control panel Kt tar Control panel Start Nodes JTC Pro has 2 start modes for recording. Before you record anything you can select one of the modes shown as Ar and M; select an employ press, push and hold the Stop Modes button to select a mode. Normal Recording 1: It's the regular way of loop recording. Hit the Loop foot switch and start playing. Timing Is Important, and It needs a bit practice to create a perfect loop. But steel, It's simple and easy to do I.
Control panel 3 Segment Digit Screen Shows selected memory and the song tempo. Memory Select Knob Switch between 1-256 memories. Also controls the global settings (see. Global Settings). Volstead Button ‘Save: After recording a track, press once the button, “SR” will blink on the screen and select a preset (1 — 246) and click again. Delete: Select a preset, press and hold the button, * dL will blink on the screen and press the button again to clear the preset.
Control panel Global Settings RD — Record / Dubbing 1st Press: Start recording. 2nd Crass: Start looping and start recording overdub It will create overdubs sate time the loop starts over until your press again. 3nd Press: Stop recording overdub and keep the track looping with recorded layer(s) {and pass the foot switch again to record another overdub / press again to stop recording overdub). Press and HOLD {during the lop with overdub: The Last overdub will stop playing.
Global Settings Formatting JTC PRO To reaching the global settings, press and hold the Loop Foot switch, and plug-in the power cable to tum ON the pedal. When the “GLb SEE" will appear on the screen, then: Loop Foot switch Alternate Control Push Save/Delete button: You can choose Loop foot switch function by using the Memory Select knob: ~ (Record and Playgoer cf (Record and Dub).
Update the JTC drum&loop pro 1.Connect the USB (Micro B) cable to your computer and the pedal. 2.Press and hold the Loop foot switch + Save + Tempo buttons and plug the power cable while holding It. 3.JTC Pro will start running In update mode. You will see “UP” on the screen. 4.JTC Pro's update folder will be available to load the firmware fell on your computer. Please check the connected USB devices. 5.0pen the folder, copy the firmware fell or drag and drop) Into the USB DEVICE folder.
