WARNING To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION FCC “This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: {1) this device may not cause hammy interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
INTRODUCTION Thank you for purchasing the NUX MIGHTY AIR wireless stereo modeling guitar and bass amplifier. This compact monster can serve the modem guitar /bass players for bedroom practices, per-show warming up, travel entertainment and mots. 03 FEATURES -Latest wireless guitar technology with ultra-low latency. -Noise Gate, Guitar and Bass Amp Models, IR Cabinet Models, Dynamic, Modulation and Ambulance Effects, Acoustic Guitar Simulator, -Bully-In Drum machine.
CONTROL PANEL CONTROL PANEL INPUT INPUT JACK 1/4" mono instrument input, ft also serves as a charger that charges power to the Included wireless transmitter. (See: Using the Bully-in Wireless System.) WARNING: Never plug a STEREO cabs Into this Jack. POWER/BATTERY INDICATOR This indicator shows the battery status of the MIGHTY AIR. o-1 CHANNEL BUTTON Q undertone To switch channels. ° Press and hold this button to tum On/Gff the power. DRUM KNOB Q conventioneer To control drum volume or select drum styles.
PLAYING THE GUITAR/BASS DRUM MACHINE lies a typical mono guitar cable to connect your guitar to the MIGHTY AR. Or plug the included wireless transmitter into the guitar, and enjoy hours of cable free performances. (See. Using the Bully-In Wireless System) #Frogs and hold the POWER bunion to tum on the MIGHTY AIR. Set the VOLUME knob low before you start playing, and slowly tum it up to desired volume level. ®Press the CHANNEL bunion to select different channels.
USING THE BUILT-IN WIRELESS SYSTEM USING THE BUILT-IN WIRELESS SYSTEM MIGHTY AIR has the advanced wireless system from NUX bully-In. Just plug the included transmitter into the guitar, you will be ready to enjoy hours of cable free performance with ultra-low latency.
USING THE BUILT-IN WIRELESS SYSTEM BLUETOOTH CONNECTION charge You can also charge the transmitter by USB, but the transmitter does not send signal while It's being charged. 1 The © Indicator shows Bluetooth status as below: LED Indicator Status ON Bluetooth device Is Connected. LED blinks Standby Ready for Bluetooth connection. MIGHTY AIR Phone Follow theses steps to connect the MIGHTY AIR to the Mighty Amp App 1.Make sure the Bluetooth function of your phone is muted ON. 2.0pen the Mighty Amp App.
CHARGING THE AMPLIFIER SPECIFICATIONS The Power/Battery Indicator shows the battery status of the MIGHTY AR Transmitter MIGHTY AIR. USB Power: Type-C 5V/2A ® Operation Frequency: 2.4GHz Charging Time: 3 Hours Audio Quality: bit 44.1kHz Use a Type-C USB cable ta connect the amplifier to an adapter or Playing Time: Up to 18 Hours Latency: < 5ms the USB Jack of a computer to charge power.
