a ‘Cpu 2017 Chad Rive Co. AB ghs rearward, MLK 4 Bit a Vera of Chen Toe Cn. Of pact ve unis] nie pock rm trademarks of tr repaints corp tht ds scr nd aa ek amt or snd Wh Cha try Ga. Nome Ee orates ged ta 'WARNINGHMPORTANT SAFETY INSTRUCTIONS [TLL LAE TH WR Torso th tk of fof dot shack, dink age ho acceptance to nor motet. CATO oes te of Ellie dic, dt mre No or cashier pas ie. Pe svc io ual npr. CHITIN This ou part has bot smd 41 urd comply We he Is for Cas E fl cn rst Par 16 of FIO Rule.
Ductile Is a real stereo delay pedal with Independent time / sub-admission & repeat knobs. In the 30's, all of the professional musicians used rack-mount effects to run stereo delay. It was the golden era of legendary engineering like Lexicon Delta, TC 2290, Eventide H3000, and moral. When we talked to “working musicians” we found that they wer looking for a great stare delay with a compact size and ultra-simple controls.
Control panel Control panel LEVEL Kalb When using ENTER LOOP mods, the LEVEL knob will become your LOOP LEVEL to control Phrase Loop volume. DELAY TYPE Knob This Is a 5-way rotary switch. You can choose the delay type as ANALOG, TAPE, Did, MOD, and VERB. PARAMETER Knob Sets the final compressor Output level. Allows you to balance the signal difference. between Input and Output, or you can increase / decrease output level depending upon ‘your essential needs.
Control panel TINE 1 Knob Controls delay's delay time. When In Tap Tempo, It becomes a sub-division according to current parameter. REPEAT 1 Knob Controls delay! 's number of repeats. TINE 2 Knot Controls delay's delay time. When In Tap Tempo, It becomes a sub-division according to current parameter. REPEAT 2 Knob Controls delay's number of repeats. LODE display Shows current Delay types, and delay ims In MS/BPM.
1/0 Jacks IN 1 (Moog) out USB Port OUT 1 (Wacko} DE Jack 1/0 Jacks IN1 (NOON} If you only connect with IN 1, then IN 1 signal will run DELAY 1 related to TIME 1 and REPEAT 1 knobs for OUT 1. Pedal will copy IN 1 signal to run DELAY 2 related ta TIME 2 and REPEAT 2 knob for OUT 2. If you connect using IN 1 and IN 2, then IN 1 and IN 2 will run DELAY 1 for OUT 1 and DELAY 2 for OUT 2 separately.
