NL» MG-30 VERSATILE MODELER EE FABERGE a O7= 07 _10 FE ces A — = Ema Ah het page ind = wnenuetioom Made China
‘Copyright 2020 Cherub Technology Co. All rights reserved. MUX and MG-30 ae trademarks of Cherub Technology Go. Other product names modeled I this product are trademarks of their respective companies that do not endorse and are not associated or affiliated with Cherub Technology Co. Accuracy Whilst every effort has been Basie to ensure the accuracy and content of this manual, Cherubs Technology Co. makes no Representations or Tarantino regarding the contents.
Control Panel Front Panel PRE == SA DIRECTION MASTER Kio SIGNAL BLOCK ‘SAVE BUTTON.
Control Panel MASTER KNOB Controls overall master volume of MG-30. SIGNAL BLOCK IBD I0i0:B = 5 Under the current patch. Press once to engage/dissngage the related signal block. Hold 1o enter to related signal block auditing. Hold 2 signal blocks can exchange the block position. Signal blocks are also the Indicators to show the cement status. [Engaged / Disengaged) 5-WAY DIRECTION ENCODER During current patch location display.
Control Panel Press UP & DOWN foot switch, then you can enter to DRUM & LOOPIER. In the meantime, DOWN foot switch controls phrase loopier, UP foot switch controls drum. Er Knob 1: controls LOOP YOL. Cram ( [ Press Once { Press Twice } (Press & Hold) Cara) Lee RHYTHM FOOT SWITCH Press Once Ch or Doubles press CTR to taxi DRUM & LOOPIER. os A TRL fo, ten Rotate knob 1 to switch CHROMATIC or COMPEL. G , press knob 1 ta switch Mute or Listening. Note: COMPEL. G is guitar compensation tuning algorithm.
Global Setting Here we will explain more details about GLOBAL SETTING, actually it's very intuitive, you can follow the Ul to operate easily. Hold HOME/GLOBAL button to enter to GLOBAL SETTING. LEG OUTPUT MODE You can chooses the suitable output mode with related connection. While you choose COMBO FRONT / STACK FRONT, MG-30 will bypass IR(Cab) block. In output mode, MG-30 offers 3 band EQ to let you tweak global sound be suitable for current environment.
Global Setting FACTORY DEFAULT You can recall the factory preset. INFO You can check firmware version and GPU utility. «Input Impedance INPUT: 1M ohm RETURN: 220k ohm = Output Impedance OUTPUT: 1k ohm SEND: 1k chm * A/D Converter: bit «Sampling Frequency: kHz = Frequency Response Range: 20Hz ~ kHz «Dynamic Range: 110dB = Current Draw: <400mA * Power: 9 DC negative center «Dimensions: clammily) x 166mm{w) x 54mm (H) «Wrought: 1.5kg “Specifications and features ars subject to sangs without notice.
