2 PLUS 2.
WARNING To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
How to Operate System Overview The NUX B-2 PLUS is a pocket-size 2.4GHz guitar wireless system that offers guitar players an easy solution to go wireless. Step on the latest NUX wireless transmission algorithm, B-2 PLUS secures a better connection in a noisy RF environment. With the newly-added auto-off function, you'll never have to worry about leaving the system on and draining out the batteries. Since the B-2 PLUS is a 2.
How to Operate How to Operate 2.Plug the transmitter into a guitar. The transmitter will remember the channel used last time and enter transmitting status. The channel LED indicator is “ON” while transmitting. Transmitter 3.Plug the receiver into an amplifier or EFX unit. The receiver will remember the channel used last time and enter receiving status. The channel LED indicator is “ON” while receiving stably, and the LED indicator will flash if the signal is too weak.
How to Operate How to Operate 4.Set up the transmitter and the receiver in the same channel. Press the channel button and choose channel number. The LED indicator will show channel status, please make sure transmitter channel matches receiver channel. Note: The transmitter and the receiver will remember the channel used last time. Note: When you turn on the transmitter or the receiver, it will show current battery status for 1.5 seconds. What’s More 1.
How to Operate 2.The B-2 PLUS wireless system has a user-friendly tongue-and-groove buckle design; it’s compact and easy to put into your guitar bag or pedalboard bag. How to Operate 3.The B-2 PLUS is compatible with most guitar body types, including Stratocasters* with whammy bars. *Stratocaster is a trademark of Fender.
Specifications How to Operate Charging Operation You can charge the wireless units directly by using the micro-B USB Y-cable (included): 2.4GHz operating frequency 32bit 44.1kHz Latency: <5ms Operation Range: Up to 15 meters / 60 feet line-of-sight (environment-dependent) Frequency response: 20Hz – 20kHz THD+ Noise < 0.05% @1kHz TX/RX Battery Capacity: 750mAh / 3.
C 2020 Cherub Technology-All rights reserved. No part of this publication may be reproduced in any form without prior written permission of Cherub Technology. What's in the box B-2 PLUS Transmitter. B-2 PLUS Receiver. USB-A to 2 Micro-USB cable. Quick Start Manual, Warranty and User License Agreement. RoH www.nuxefx.
操作指南 产品简介 NUX B-2 PLUS是一款袖珍型2.4GHz无线系统，可为吉他演奏者提供简便的无线解决方案。B-2 PLUS采用最新的 使用环境 NUX无线传输算法，可在嘈杂的RF环境中确保更好的连接稳定性。 新增的自动关机功能，让您无需担心忘记 B-2 PLUS采用的是2.4GHz无线系统方案，为了避免信号串扰，使用B-2 PLUS时请至少与其它无线射频设备 关机耗尽电池电量的麻烦。 （例如：无线路由器）保持3米以上的距离。 注意：在有大量无线射频信号的环境下使用B-2 PLUS可能会出现串扰现象。 即插即用2.4GHz无线系统 32bit/44.
操作指南 操作指南 快速上手 2. 将发射器接入吉他。 1.
操作指南 操作指南 3. 将接收器接入音箱或效果器。 开机后，接收器会自动选用最近一次使用的频道，对应的频道指示灯会被点亮。 信号稳定时频道指示灯保持长亮；信号弱或不稳定时频道指示灯会闪烁。 4. 设置发射器与接收器的频道。 使用“Channel”按钮切换不同的频道，当前选中频道的对应频道指示灯会点亮。 注意：B-2 PLUS具有记忆功能，开机后系统会自动选用最近一次使用的频道。 注意：开机时，发射器与接收器会显示剩余电量信息1.
操作指南 操作指南 更多内容 2. B-2 PLUS延续了B-2的锁扣设计， 接收器和发射器可以合二为一，既便携又防丢。 1.
操作指南 操作指南 3.
技术规格 有关产品中所含有害物质的说明 本资料就本公司产品中所含的特定有害物质及其安全性予以说明。 工作频率：2.4GHz 本资料适用于2007年3月1日以后本公司所制造的产品。 采样精度：32bit 环保使用期限 采样频率：44.1kHz 此标志适用于在中国国内销售的电子信息产品，表示环保使用期限 系统延时：<5ms 10 有效距离：≤15m（实际距离会因使用环境而异） 的年数。所谓环保使用期限是指在制造日起的规定期限内，产品中 所含的有害物质不致引起环境污染,不会对人身、财产造成严重的不 良影响。环保使用期限仅在遵照产品使用说明，正确使用产品的条 件下才有效。不当的使用，将会导致有害物质泄漏的危险。 频率响应：20Hz–20kHz 信号失真度：<0.05%@1kHz 发射器/接收器电池容量：750mAh / 3.
