WARNING To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
How to Operate Transmitter and Receiver Pairing Transmitter Female Port Fastener Button Battery & Channel Group Indicator Power Switch Button RF Status LED Micro-USB Port B-3 PLUS has auto pairing and channel group selection. Please follow the steps: 1.Turn on the Transmitter and Receiver units. 2.The Transmitter and Receiver will get paired automatically. (The device will detect current RF environment and choose the suitable Channel Group to operate while turn on.) 3.
How to Operate How to Operate Auto-Off Function B-3 PLUS 2.4GHz Frequency Tables: If the transmitter is not connected with microphone or there is no input signal for 10 minutes, the transmitter will turn off. 10 minutes after the transmitter is turned off, the receiver will also power off. Receiver Battery Charging When you turn on the device, the battery indicator(s) will light on for 1 second as a battery gauge.
Application Scenarios Application Scenarios 3.Conventional Use 2 1.Wireless Recording Microphone Transmitter B-3 PLUS Transmitter Hot Shoe Receiver Receiver Holder Cannon B-2 PLUS Transmitter Camera B-2 PLUS Receiver 2.
Specifications 2.4GHz operating frequency 24bit 44.1kHz Latency: <3.5ms Transmission Range: Up to 100 feet line-of-sight Dynamic Range: 110dB THD+ Noise < 0.2% @1kHz Battery Life: 7hrs Dimensions Transmitter: 107mm(L)x25mm(W)x25mm(H) Receiver: 107mm(L)x25mm(W)x25mm(H) Weight Transmitter: 68g Receiver: 70g 产品简介 感谢您选购NUX B-3 PLUS，它是一款基于2.4GHz无线技术的新一 代麦克风无线系统。几乎不需要任何设置，它就能将您最喜爱 的动圈式麦克风变成无线麦克风，从此摆脱线材的束缚，享受 无线乐趣。 为了满足乐手的需求，我们开发了多款2.
产品简介 操作指南 配对与使用 发射器 卡农接口（母） 接口卡扣按钮 通道指示灯 电源/MUTE按钮 工作指示灯 Micro-USB充电接口 B-3 PLUS内置了强大的自动配对功能，请按照如下步骤操作： 1. 按住发射器与接收器的电源按钮直至开机。 2. 发射器与接收器会开始检测射频环境并自动选择最佳的工作 通道完成配对。 3.
操作指南 操作指南 注意 开机时，通道指示灯会先显示电池电量然后再显示工作通道。 发射器 连接成功后发射器与接收器的工作指示灯均会长亮蓝色。如果 接收器 接收器没有接收到信号（受到强烈干扰或超出有效距离），发 充电 射器与接收器的工作指示灯会长亮红色。 B-3 PLUS 2.
使用场景 使用场景 1.无线录影 2.常规用途二 麦克风 发射器 B-3 PLUS 发射器 接收器 B-2 PLUS 发射器 B-2 PLUS 接收器 B-3 PLUS 接收器 2.
工作频率：2.4GHz 采样精度：24bit 采样频率：44.1kHz 系统延时：< 3.5ms 动态范围：110dB 有效距离：≤30m（实际距离会因使用环境而异） 信号失真度：<0.
