ee $5.
WARNING To reduce the sk of fire or strict shock, do not expos this appliance to ran or postural. CAUTION “This device compos With part 15 of the FC Rules.
How to Operate How to Operate cD oT fa Here Mic Port fi TRS usarortfi—ff) < Receiver Transmitter ~=Push and held the power button for 2.5 seconds to tum ON the TX and RX. Before it gets paired automatically, you can see TX's battery status; if the LED indicator: Blinks GREEN — Well Charged {100%> GREEN >75%) blinks YELLOW —Madman Batista (75%: YELLOW >50%) Blinks RED — Lower Battery (50%> RED 225%) Hashing RED for 10 times — Low Battery turn off automatically to protect battery Ifs.
How to Operate After 2 seconds, it will be paired automatically, and the TX's LED status will blink GREEN. (B~10 Log will detect the best channel in the 2.4GHz frequency band, if the transmitter and receiver get paired, TX's LED ‘will show GREEN. If the RX doesn't receive a signal, the RX's display will flash Since the RX receive the signal, the display will show +) to present the current receiving signal strength. How to Operate Clip the TX as lavaliere microphone to mic your voice.
How to Operate Since the TX is muted on. Short press TX's power button fo switch MUTE(LED shows NORMALIZATION show GREEN) status. Since the RX is muted on, short press the power button to adjust OUTPUT LEVEL: 0dB / +6dB / +12dB / -12dB / BAB sequentially. The default OUTPUT LEVEL is 0B. Gasses tum OFF both wireless units (the TX and the RX), and charge the windlass units directly by using the USB-C Y-cable {Included}. Once the unit Is full charged, the charging function will be shut down automatically.
