Cut Sheet

123-M CONDUIT TO Z PURLIN CLIP, 1/2", 3/4" EMT, 0.709"–1.181" OD,

0.06"–0.1" FLANGE

CATALOG NUMBER

123812M

CERTIFICATIONS

FEATURES

Snap-close conduit support

Conduit clip rotates 360 degrees

Supports conduit from purlin

PRODUCT ATTRIBUTES

Material: Spring Steel

Finish: nVent CADDY Armour

EMT Conduit Size: 1/2";3/4"

Outer Diameter: 0.709" – 1.181"

Flange Thickness: 0.0600" – 0.1000"

B: 5/8" Min

PAGE 1
23-M CONDUIT TO Z PURLIN CLIP, 1/2", 3/4" EMT, 0.709"–1.181" OD, 0.06"–0.1" FLANGE CATALOG NUMBER 123812M CERTIFICATIONS FEATURES Snap-close conduit support Conduit clip rotates 360 degrees Supports conduit from purlin PRODUCT ATTRIBUTES Material: Spring Steel Finish: nVent CADDY Armour EMT Conduit Size: 1/2";3/4" Outer Diameter: 0.709" – 1.181" Flange Thickness: 0.0600" – 0.
PAGE 2
Static Load: 100 lb DIAGRAMS WARNING nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.