Cut Sheet

EM-M CONDUIT/PIPE TO FLANGE CLIP, SPRING STEEL, NVENT CADDY

ARMOUR, 1" EMT, 5/16"–1/2" FLANGE

CATALOG NUMBER

16M58

FEATURES

Supports conduit/pipe or cable from beam flanges

Snap close clip pivots a full 360°

Requires only a hammer to install

PRODUCT ATTRIBUTES

Material: Spring Steel

Finish: nVent CADDY Armour

EMT Conduit Size: 3/4";1"

Rigid Conduit/Pipe Size: 3/4";1"

Outer Diameter: 0.922" – 1.378"

Flange Thickness: 5/16" – 1/2"

Static Load: 75 lb

DIAGRAMS

PAGE 1
EM-M CONDUIT/PIPE TO FLANGE CLIP, SPRING STEEL, NVENT CADDY ARMOUR, 1" EMT, 5/16"–1/2" FLANGE CATALOG NUMBER 16M58 FEATURES Supports conduit/pipe or cable from beam flanges Snap close clip pivots a full 360° Requires only a hammer to install PRODUCT ATTRIBUTES Material: Spring Steel Finish: nVent CADDY Armour EMT Conduit Size: 3/4";1" Rigid Conduit/Pipe Size: 3/4";1" Outer Diameter: 0.922" – 1.
PAGE 2
WARNING nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty. North America Europe Europe APAC +1.800.753.