Cut Sheet

401 CLEVIS HANGER, EG, PG, 1" PIPE, 1.315" OD, 3/8" ROD

CATALOG NUMBER

4010100EG

CERTIFICATIONS

FEATURES

Recommended for the suspension of stationary non-insulated pipe lines

Flared edges help prevent sharp surfaces from coming into contact with the pipe (1/2" to 2" pipe sizes)

Clevis bottom pivots to allow pipe to be fed from either direction

PRODUCT ATTRIBUTES

Material: Steel

Finish: Electrogalvanized;Pregalvanized

Pipe Size: 1"

Outer Diameter: 1.315"

Rod Size: 3/8"

A: 2 13/16"

B: 1 3/8"

C: 3/8"

PAGE 1
401 CLEVIS HANGER, EG, PG, 1" PIPE, 1.315" OD, 3/8" ROD CATALOG NUMBER 4010100EG CERTIFICATIONS FEATURES Recommended for the suspension of stationary non-insulated pipe lines Flared edges help prevent sharp surfaces from coming into contact with the pipe (1/2" to 2" pipe sizes) Clevis bottom pivots to allow pipe to be fed from either direction PRODUCT ATTRIBUTES Material: Steel Finish: Electrogalvanized;Pregalvanized Pipe Size: 1" Outer Diameter: 1.
PAGE 2
Static Load: 600 lb DIAGRAMS WARNING nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.