Brochure

4
www.erico.com
Fig. 1 Fig. 2 Fig. 3
Fig. 4 Fig. 5 Fig. 6
Fig. 7
Part
Number
Fig.
#
Description
Standard
Packaging
Quantity
TSRBS1625 1 Telescoping Rigid Box Support 25
TSGLDR1 2 CADDY
®
GLIDER Electrical Box Attachment 100
TSGLDR1TC 2 CADDY
®
GLIDER Electrical Box Attachment 100
TSGB16 3 Telescoping Screw Gun Bracket 11” to 18” Stud Spacing 50
TSGB1624 3
Telescoping Screw Gun Bracket 15 3/4” to 25”
Stud Spacing
50
TSGB24 3 Telescoping Screw Gun Bracket 17” to 26” Stud Spacing 50
TEBS1624 4 Electrical Box Mount Strap 50
RBS16 5
Between Stud Box Mounting Brackets -Mounts
up to three 4” or 4 11/16” boxes/plaster rings,
16” bracket
25
RBS24 6
Between Stud Box Mounting Brackets -Mounts
up to four 4” or 4 11/16” boxes/plaster rings,
24” bracket
25
FMBS1824 7 Floor Mount Box Support 25
The TSRBS1625 Telescoping Box Support, part of the CADDY
®
line of fasteners
from ERICO, is ideal for supporting and positioning 4” square and 4 11/16”
electrical boxes and mud rings. A unique, open design allows boxes to be positioned
anywhere inside the opening of the TSRBS1625. For added convenience, boxes can
be installed off-site and then are fully adjustable to fi t varying stud spaces on-site
without needing to modify the box location. The TSRBS1625 is cULus listed, can
support up to four electrical boxes and is adjustable from 16” to 25”.
Between-Stud Applications
Fig. 1 Fig. 2 Fig. 3
Fig. 4 Fig. 5
Part
Number
Fig.
#
Description
Standard
Packaging
Quantity
MP1S 1 Single gang plate mounting bracket for new work 25
MP2S 2 Double gang plate mounting bracket for new work 25
MP1SCB 3
Single Gang Box Eliminator Conduit Support
(Includes: MP1S, MP1SCB1220 and screws)
25
MP2SCB 4
Double Gang Box Eliminator Conduit Support
(Includes: MP2S, MP1SCB1220 and screws)
25
MPCB1220 5 Box Eliminator Conduit Support 250
The fi rst product of its kind, the Box Eliminator Conduit Support (MPCB1220) is designed to
maintain the integrity of high-performance cable and help prevent damage, such as kinking,
that can occur when an electrical box is used. Part of the CADDY
®
line from ERICO, this
support attaches to the MP1S single gang or the MP2S double gang plate mounting bracket.
The MPCB1220 supports 3/4”, 1” or 1 1/4” conduit. When datacomm cables are required
to be run in conduit, the MPCB1220 eliminates the need for using an electrical box. This
provides an easy-to-install method for meeting code in areas where communication cable
must be run in conduit and prevents the minimum bend radius for fi ber and copper cabling
from being exceeded.
Datacomm
NEW!