Cut Sheet

CONDUIT/PIPE TO FLANGE CLIP SIDE MOUNT 14-2 TO12-3 MC/AC, 1/8–1/4"

FLANGE

CATALOG NUMBER

6M24SM

CERTIFICATIONS

FEATURES

Supports conduit/pipe or cable from beam flanges

Snap close clip pivots a full 360°

Requires only a hammer to install

PRODUCT ATTRIBUTES

Material: Spring Steel

Finish: nVent CADDY Armour

Rigid Conduit/Pipe Size: 3/8"

Flexible Conduit Size: 3/8"

MC/AC Cable Size: 14-2 to 12-3

Outer Diameter: 0.551" – 0.709"

Flange Thickness: 1/8" – 1/4"

PAGE 1
CONDUIT/PIPE TO FLANGE CLIP SIDE MOUNT 14-2 TO12-3 MC/AC, 1/8–1/4" FLANGE CATALOG NUMBER 6M24SM CERTIFICATIONS FEATURES Supports conduit/pipe or cable from beam flanges Snap close clip pivots a full 360° Requires only a hammer to install PRODUCT ATTRIBUTES Material: Spring Steel Finish: nVent CADDY Armour Rigid Conduit/Pipe Size: 3/8" Flexible Conduit Size: 3/8" MC/AC Cable Size: 14-2 to 12-3 Outer Diameter: 0.551" – 0.
PAGE 2
Static Load: 25 lb DIAGRAMS WARNING nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.