Cut Sheet

SNAP CLOSE METAL DECK CONDUIT CLAMP, 1/2", 3/4" EMT, 1/2", 3/4" RIGID

CATALOG NUMBER

AOL812M

FEATURES

Provides spacing between conduit and deck surface

Easily attached with screw gun or power tool

Permits conduit to be laid out and then attached

Eliminates need for offset bending conduit

PRODUCT ATTRIBUTES

Material: Spring Steel;Steel

Finish: nVent CADDY Armour;Pregalvanized

EMT Conduit Size: 1/2";3/4"

Rigid Conduit Size: 1/2";3/4"

Outer Diameter: 0.709" – 1.181"

Hole Size: 1/4"

A: 2.396"

B: 0.490"

PAGE 1
SNAP CLOSE METAL DECK CONDUIT CLAMP, 1/2", 3/4" EMT, 1/2", 3/4" RIGID CATALOG NUMBER AOL812M FEATURES Provides spacing between conduit and deck surface Easily attached with screw gun or power tool Permits conduit to be laid out and then attached Eliminates need for offset bending conduit PRODUCT ATTRIBUTES Material: Spring Steel;Steel Finish: nVent CADDY Armour;Pregalvanized EMT Conduit Size: 1/2";3/4" Rigid Conduit Size: 1/2";3/4" Outer Diameter: 0.709" – 1.181" Hole Size: 1/4" A: 2.396" B: 0.
PAGE 2
ADDITIONAL PRODUCT DETAILS No load rating, for positioning only. DIAGRAMS WARNING nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative.