Cut Sheet

STAINLESS STEEL HANGER FOR 1.5MM STAINLESS STEEL WIRE ROPE

CATALOG NUMBER

SLJR200

FEATURES

Low-profile locking device minimizes visual impact

Suitable for 1.5 mm nVent CADDY Speed Link cable

PRODUCT ATTRIBUTES

Material: Stainless Steel 304 (EN 1.4301)

Wire Rope Diameter: 1.5 mm

Height: 3/4"

Width: 1/2"

ADDITIONAL PRODUCT DETAILS

The 1.5 mm locking devices are only to be used with the SLC15L1000SP and SLC15L50MSP wire spools, or any other 1.5

mm nVent CADDY Speed Link accessories. Do not use with any other wires.

DIAGRAMS

PAGE 1
STAINLESS STEEL HANGER FOR 1.5MM STAINLESS STEEL WIRE ROPE CATALOG NUMBER SLJR200 FEATURES Low-profile locking device minimizes visual impact Suitable for 1.5 mm nVent CADDY Speed Link cable PRODUCT ATTRIBUTES Material: Stainless Steel 304 (EN 1.4301) Wire Rope Diameter: 1.5 mm Height: 3/4" Width: 1/2" ADDITIONAL PRODUCT DETAILS The 1.5 mm locking devices are only to be used with the SLC15L1000SP and SLC15L50MSP wire spools, or any other 1.5 mm nVent CADDY Speed Link accessories.
PAGE 2
WARNING nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty. North America Europe Europe APAC +1.800.753.