Cut Sheet

COPPER-BONDED GROUND ROD, POINTED, 5/8" DIA, 8', 13 MIL PLATING, 6.8

CATALOG NUMBER

615883

CERTIFICATIONS

FEATURES

99.9% pure electrolytic copper coating

Rods have a high carbon steel core and tip that provide superior strength when driving

Copper coating will not crack when bent or tear when driven

Minimum copper coating of 10 mils on rods listed to UL® 467

nVent ERICO name, length, diameter and part number is roll-stamped within 12" (304,8 mm) of chamfered end

UL logo and control number where applicable stamped on each rod for easy inspection after installation

PRODUCT ATTRIBUTES

Material: Copper-Bonded Steel

Tensile Strength: 80,000 psi Min

Ground Rod Diameter, Nominal: 5/8"

Ground Rod Diameter, Actual: 0.561"

Length: 8'

PAGE 1
COPPER-BONDED GROUND ROD, POINTED, 5/8" DIA, 8', 13 MIL PLATING, 6.8 LB CATALOG NUMBER 615883 CERTIFICATIONS FEATURES 99.
PAGE 2
Plating Thickness: 13 mil Unit Weight: 6.800 lb UPC Label: No Complies With: IEC® EN 62561-2;ANSI®/NEMA® GR1 ADDITIONAL PRODUCT DETAILS For rods to be listed to UL® 467, they must be at least 8' (2.44 m) in length. IEC® EN 62561-2 supercedes EN 50164-2. Additional lengths available. DIAGRAMS WARNING nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.nvent.
PAGE 3
North America Europe Europe APAC +1.800.753.9221 Netherlands: Germany: Shanghai: Option 1 – Customer Care +31 800-0200135 800 1890272 + 86 21 2412 1618/19 Option 2 – Technical Support France: Other Countries: Sydney: +33 800 901 793 +31 13 5835404 +61 2 9751 8500 Our powerful portfolio of brands: nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER © 2022 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates.