Cut Sheet

CABLE TO CABLE, HEAVY DUTY, PT, 500 KCMIL CONCENTRIC, 19/#9

COPPERWELD, WEAR PLATES

CATALOG NUMBER

HDPTD3Q9FW

Heavy duty connections were originally developed to be

used on reclaimed cable. The heavy duty connections use a

larger size connection cavity in the mold and a larger size

welding material than the equivalent standard duty

connection.

The larger size welding material supplies extra BTU’s to

melt the heavy oxide coating on the conductor and to

overcome some severe field conditions. Heavy duty

connections eliminate cutting the run conductor on certain

types of connections, reduce cable cleaning requirements

for old or reclaimed cable, and increase reliability under

adverse field conditions.

Heavy duty connections are increasingly being specified for

copper-coated steel conductor connections.

FEATURES

Forms a permanent, low resistance connection

Provides a molecular bond

nVent ERICO Cadweld Exothermic Connections are rated with the same current capacity as the conductor

Portable installation equipment with no external source of power required

Installers can be easily trained to make nVent ERICO Cadweld Exothermic Connections

Connections can be visually inspected

PRODUCT ATTRIBUTES

Mold Family: PT

Conductor 1: 500 kcmil Concentric

Conductor 1 Outer Diameter, Nominal: 0.813"

Conductor 2: 19/#9 Copperweld

Conductor 2 Outer Diameter, Nominal: 0.572"

Split Crucible: No

Wear Plates: Yes

PAGE 1
CABLE TO CABLE, HEAVY DUTY, PT, 500 KCMIL CONCENTRIC, 19/#9 COPPERWELD, WEAR PLATES CATALOG NUMBER HDPTD3Q9FW Heavy duty connections were originally developed to be used on reclaimed cable. The heavy duty connections use a larger size connection cavity in the mold and a larger size welding material than the equivalent standard duty connection. The larger size welding material supplies extra BTU’s to melt the heavy oxide coating on the conductor and to overcome some severe field conditions.
PAGE 2
Mold Only: No Welding Material: 200 x 2 or 400PLUSF20, Sold Separately Handle Clamp: L159, Sold Separately Price Key: D Ease of Use: Preferred ADDITIONAL PRODUCT DETAILS For applications such as computer room, tunnel or other low-ventilation areas, specify a smokeless nVent ERICO Cadweld Exolon mold. Add an XL prefix to the standard mold part number when ordering (for example, a TAC2Q2Q becomes XLTAC2Q2Q).
PAGE 3
North America Europe Europe APAC +1.800.753.9221 Netherlands: Germany: Shanghai: Option 1 – Customer Care +31 800-0200135 800 1890272 + 86 21 2412 1618/19 Option 2 – Technical Support France: Other Countries: Sydney: +33 800 901 793 +31 13 5835404 +61 2 9751 8500 Our powerful portfolio of brands: nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER © 2022 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates.