Cut Sheet

Cable to Steel–HSC2G1.50

nVent ERICO Cadweld graphite molds are designed and engineered for thousands of connection styles and conductor combinations.

• Forms a permanent, low resistance connection

• Provides a molecular bond

• nVent ERICO Cadweld Exothermic Connections are rated with the same current capacity as the conductor

• Portable installation equipment with no external source of power required

• Installers can be easily trained to make nVent ERICO Cadweld Exothermic Connections

• Connections can be visually inspected

Part Number HSC2G1.50

Mold Family HS

Connects To Steel Pipe

Conductor Size 2/0 Concentric

Conductor Outer Diameter, Nominal 0.418"

Pipe Size 1 1/2"

Outer Diameter 1.9"

Kit No

Split Crucible No

Wear Plates No

Mold Only No

Welding Material 90 or 90PLUSF20, Sold Separately

Handle Clamp L160 and B159H, Sold Separately

Price Key C

Ease of Use Preferred

PAGE 1
Cable to Steel – HSC2G1.50 nVent ERICO Cadweld graphite molds are designed and engineered for thousands of connection styles and conductor combinations.
PAGE 2
Part Number HSC2G1.50 Certifications cULus Standard Packaging Quantity 1 pc UPC 78285679322 For applications such as computer room, tunnel or other low-ventilation areas, specify a smokeless nVent ERICO Cadweld Exolon mold. Add an XL prefix to the standard mold part number when ordering (for example, a TAC2Q2Q becomes XLTAC2Q2Q). Similarly, nVent ERICO Cadweld Exolon welding material is also designated by the XL prefix (for example, 150 becomes XL150). A gap between conductors may be required.