Cut Sheet

FLEXIBLE CONDUCTORS eriFlex FlexibAr busbArs And ACCessories
Spec-01138 D
EQUIPMENT PROTECTIONSUBJECT TO CHANGE WITHOUT NOTICEPOWER AND GROUNDING CONNECTIVITY5
ERIFLEX FLEXIBAR, TINNED COPPER
INDUSTRY STANDARDS
Certification Details: UL 67, UL 758
CSA C22.2 No. 0 and 210
Complies With: IEC 60439.1, IEC 61439.1, IEC 61439.1 Class II
FEATURES
• Thin layers of tinned electrolytic copper formed into a stack
• Insulated by high-resistance, self-extinguishing PVC with less
than 20% contact with conductor for high flexibility
• Easily bent, folded, and twisted, improving assembly flexibility,
shortening connections, and decreasing footprint
• Dramatically smaller and more flexible than comparable cable
based on ampacity
• Better power density than cable with lower skin effect ratio
• Connections made by punching and bolting directly through the
copper laminates, clamping onto the end of the ERIFLEX
• ERIFLEX FLEXIBAR, or welding using CADWELD
• No lugs needed, reducing installation time and improving
resistance to vibration
• Weight savings and material savings compared to wire
alternatives
• Reduces total installation cost
• Traceability codes and designation part numbers printed on
insulation
• 100% production dielectric tested
• UL 758 Appliance Wiring Material requirements for Cold Bend
testing at -40°C and -50°C (-40°F and -58°F)
• GOST compliant
• RoHS compliant
SPECIFICATIONS
• Material: Copper, Polyvinyl Chloride
• Dielectric Strength: 20 kV/mm
• Flammability Rating: UL 94V-0
• Insulation Elongation: 370 %
• Insulation Thickness: 0.08”
• Nominal Voltage, UL/IEC: 1,000 VAC, 1,500 VDC
• Operating Temperature: -58 to 221 °F
• Forming Temperature: 32 – 131 °F
FINISH
• Finish: Tinned
%
$
1
/