Cut Sheet

CERTIFICATIONS
FEATURES
Thin layers of tinned electrolytic copper formed into a stack
Full range from 19.5 mm² up to 1200 mm² and 125 A to 2800 A
Insulated by high-resistance, halogen free, flame retardant and low smoke material with less than 20% contact with
conductor for high flexibility
Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint
Dramatically smaller and more flexible than comparable cable based on ampacity
Better power density than cable with lower skin effect ratio
Connections made by punching and bolting directly through the copper laminates or clamping onto the end of the nVent
ERIFLEX Flexibar
No lugs needed, reducing installation time and improving resistance to vibration
Weight savings and material savings compared to wire alternatives
Reduces total installation cost
Traceability codes and designation part numbers printed on insulation
Conforms to NF EN 45545 obtaining an HL3 classification for chapters R22 and R23
100% production dielectric tested
RoHS compliant
Tinned copper allows for copper or aluminum conductor connections
On request, can be manufactured with other colors (typically with Orange sleeve for battery connection)
Compliant to ISO 6469-1 (Electrically propelled road vehicles - Part 1: Rechargeable energy storage system) - Section 6.2.2
Vibrations
PRODUCT ATTRIBUTES
Article Number: 534004
Typical Application Current Rating: 125 A
Length: 6.560'
Finish: Tinned
Material: Copper;Thermoplastic Elastomer
Dielectric Strength: 20 kV/mm
Flammability Rating: UL® 94V-0
2