Cut Sheet

ERIFLEX FLEXIBAR, Tinned Copper–FLEX3MTC5X50X1 (505529)

• Thin layers of tinned electrolytic copper formed into a stack

• Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility

• Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint

• Dramatically smaller and more flexible than comparable cable based on ampacity

• Better power density than cable with lower skin effect ratio

• Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the ERIFLEX

FLEXIBAR, or welding using ERICO CADWELD

• No lugs needed, reducing installation time and improving resistance to vibration

• Weight savings and material savings compared to wire alternatives

• Reduces total installation cost

• Traceability codes and designation part numbers printed on insulation

• 100% production dielectric tested

• UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F)

• EAC compliant

• RoHS compliant

Part Number FLEX3MTC5X50X1

Article Number 505529

Typical Application Current Rating 800 A

Finish Tinned

Material Copper

Polyvinylchloride

Dielectric Strength 20 kV/mm

Flammability Rating UL

94V-0

Insulation Elongation 370 %

Insulation Thickness 0.08"

Nominal Voltage, UL/IEC 1,000 VAC

1,500 VDC

Working Temperature -58 to 221 °F

Forming Temperature 32 – 131 °F

Certification Details UL® 67

UL® 758

Complies With IEC® 60439.1

IEC® 61439.1

IEC® 61439.1 Class II

PAGE 1
ERIFLEX FLEXIBAR, Tinned Copper – FLEX3MTC5X50X1 (505529) • • • • • • • • • • • • • • Thin layers of tinned electrolytic copper formed into a stack Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint Dramatically smaller and more flexible than comparable cable based on ampacity Better power density than cable with lower skin effe
PAGE 2
Part Number FLEX3MTC5X50X1 Length (L) 9.84' ∆T 30 K 730 A ∆T 45 K 911 A ∆T 60 K 1,065 A Conducting Layers (N) 5 A 1.969" B 0.039" Cross Section 493.38 kcmil 2 Bar Current Coefficient 1.72 3 Bar Current Coefficient 2.