Cut Sheet

Wall-Mount EnclosurEs Wall-Mount EnclosurEs and accEssoriEs
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEstainlEss stEEl1
Spec-00374 I
Spec-00374
continuous HingE WitH claMps, typE 4X
inDustry stanDarDs
UL 508A Listed; Type 3R, 4, 4X, 12; File No. E61997
cUL Listed per CSA C22.2 No 94; Type 3R, 4, 4X, 12; File No.
E61997
NEMA/EEMAC Type 3, 3R, 4, 4X, 12, 13
CSA File No. 42186: Type 4, 4X, 12
IEC 60529, IP66
Meets NEMA Type 3RX requirements
application
For use in indoor and outdoor corrosive environments that require
a water-tight seal, this enclosure’s seamless foam-in-place
gasket and screw-down clamps provide a secure seal against
contaminants.
spEciFications
• 14 gauge Type 304 or Type 316L stainless steel bodies and doors
• Seams continuously welded and ground smooth
• Seamless foam-in-place gasket
• Rolled lip around three sides of door
• Stainless steel door clamp assembly
• Hasp and staple for padlocking
• Door removed by pulling stainless steel continuous hinge pin
• Data pocket is high-impact thermoplastic
• Collar studs provided for mounting optional panels
• Exterior hardware on Type 316L stainless steel enclosures
matches enclosure material
• Bonding provision on door; grounding stud on body
FinisH
Door, sides, top and bottom have smooth #4 brushed finish.
accEssoriEs
Fast-Operating Clamp Assembly
Panels for Type 3R, 4, 4X, 12 and 13 Enclosures
Junction Box and Wall-Mount Enclosure Swing-Out Panel Kit
Steel, Stainless Steel and Non-Metallic Window Kits
H2OMIT Vent Drains, Type 4X
H2OMIT Thermoelectric Dehumidifier
Steel, Stainless Steel and Non-Metallic Window Kits
PANELITE Enclosure Lights
Hol-Sealers Hole Seals
Themoelectric Temperature Controller
MoDiFication anD custoMiZation
Hoffman excels at modifying and customizing products to
your specifications. Contact your local Hoffman sales office or
distributor for complete information.
Bulletin: A4S
Standard Product
Catalog Number
AxBxC in./mm
Stainless
Steel Type Steel Panel
Conductive
Steel Panel
Stainless
Steel Panel
Panel Size
D x E
in./mm
F
in./mm
Clamps
Qty.
Data
Pocket
A16H1206SSLP 16.00 x 12.00 x 6.00
406 x 305 x 152
304 A16P12 A16P12G A16P12SS6 13.00 x 9.00
330 x 229
1.25
32
4 Small
A16H1206SS6LP 16.00 x 12.00 x 6.00
406 x 305 x 152
316L A16P12 A16P12G A16P12SS6 13.00 x 9.00
330 x 229
1.25
32
4 Small
A16H1606SSLP 16.00 x 16.00 x 6.00
406 x 406 x 152
304 A16P16 A16P16G A16P16SS6 13.00 x 13.00
330 x 330
3.00
76
4 Small
A16H1606SS6LP 16.00 x 16.00 x 6.00
406 x 406 x 152
316L A16P16 A16P16G A16P16SS6 13.00 x 13.00
330 x 330
3.00
76
4 Small
A16H2006SSLP 16.00 x 20.00 x 6.00
406 x 508 x 152
304 A20P16 A20P16G A20P16SS6 17.00 x 13.00
432 x 330
3.00
76
4 Small
A16H2006SS6LP 16.00 x 20.00 x 6.00
406 x 508 x 152
316L A20P16 A20P16G A20P16SS6 17.00 x 13.00
432 x 330
3.00
76
4 Small
A20H1606SSLP 20.00 x 16.00 x 6.00
508 x 406 x 152
304 A20P16 A20P16G A20P16SS6 17.00 x 13.00
432 x 330
3.00
76
4 Small
A20H1606SS6LP 20.00 x 16.00 x 6.00
508 x 406 x 152
316L A20P16 A20P16G A20P16SS6 17.00 x 13.00
432 x 330
3.00
76
4 Small
A20H2006SSLP 20.00 x 20.00 x 6.00
508 x 508 x 152
304 A20P20 A20P20G A20P20SS6 17.00 x 17.00
432 x 432
3.00
76
4 Small
A20H2006SS6LP 20.00 x 20.00 x 6.00
508 x 508 x 152
316L A20P20 A20P20G A20P20SS6 17.00 x 17.00
432 x 432
3.00
76
4 Small
A24H2006SSLP 24.00 x 20.00 x 6.00
610 x 508 x 152
304 A24P20 A24P20G A24P20SS6 21.00 x 17.00
533 x 432
3.00
76
5 Small
A24H2006SS6LP 24.00 x 20.00 x 6.00
610 x 508 x 152
316L A24P20 A24P20G A24P20SS6 21.00 x 17.00
533 x 432
3.00
76
5 Small
A24H2406SSLP 24.00 x 24.00 x 6.00
610 x 610 x 152
304 A24P24 A24P24G A24P24SS6 21.00 x 21.00
533 x 533
3.00
76
5 Small
A24H2406SS6LP 24.00 x 24.00 x 6.00
610 x 610 x 152
316L A24P24 A24P24G A24P24SS6 21.00 x 21.00
533 x 533
3.00
76
5 Small