Cut Sheet
Free-Stand encloSureS Free-Stand type 1 encloSureS and acceSSorieS
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEMild Steel1
Spec-00041 I
Free-Stand, tYPe 1
induStrY StandardS
UL508A Listed; Type 1; File No. E61997
cUL Listed per CSA C22.2 No. 40; Type 1; File No. E61997
NEMA/EEMAC Type 1
IEC 60529 IP30
aPPlication
Free-Stand Type 1 Enclosures are an economical way to protect
electrical and electronic equipment in applications that do not
require extensive environmental protection.
SPeciFicationS
•
14 gauge steel body and door; 12 gauge back covers
•
4-in. high 10 gauge steel integral lifting base
•
Heights from 48 in. to 84 in. Usable height inside cabinet 4 in.
less than nominal height.
•
Sturdy 7 gauge lifting tabs
•
Flush doors
•
3-point latch with heavy-duty handle
•
Padlock provision in handle
•
Predrilled holes in lifting base provide bolt-down capability
•
Easily reversible doors on single-door models
•
Overlapping doors with no center post on two-door models
•
Bonding provision on each door
•
Studs included for mounting optional panels on threaded bolts
•
Optionalrackanglesmounttotopandbottomoffrontanges
•
Removable back covers
FiniSH
RAL 7035 light-gray polyester powder paint inside and outside.
Optionalpanelshavewhiteorconductivenish.Rackangleshave
galvanizednish.
acceSSorieS
Panels for Free-stand, Type 1 Two-Door Enclosures
Rack Angels
HF Side-Mount Filter Fans
Compact Axial Fans
PANELITE Enclosure Lights
ModiFication and cuStoMiZation
Hoffman excels at modifying and customizing products to
yourspecications.ContactyourlocalHoffmansalesoceor
distributor for complete information.
BULLETIN: A38