Cut Sheet

ELECTRICAL ACCESSORIES GroundinG
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEACCESSORIES1
Spec-00567 G
GROUNDING DEVICE
Grounding lug is designed to provide a means of attaching a
grounding conductor to an electrical enclosure. Will accept wire
sizes 2 through 14. Grounding Straps can be used to provide
electrical continuity between metal parts which must be electrically
connected. Each strap consists of a length of braided copper with a
ring terminal at both ends. Braid is insulated with green and yellow
striped plastic.
Bulletin: A80
Catalog Number
Description
Approximate
Wire Size (AWG)
Length
Between Ring
Terminals C-to-C (in.)
Length
Between Ring
Terminals C-to-C (mm)
Ring Terminal
Hole Diameter (in.)
Ring Terminal
Hole Diameter (mm)
AGS808 Grounding Strap #8 8.19 208 0.406 10
AGS816 Grounding Strap #8 16.19 411 0.406 10
AGS408 Grounding Strap #4 8.19 208 0.406 10
AGS416 Grounding Strap #4 16.19 411 0.406 10
AGlK2 Grounding lug kit 2-14 — — — —
GROUNDING BAR SYSTEM
INDUSTRY STANDARDS
UL Component Recognized; File No. E61997
APPLICATION
Three sizes of grounding bars and insulated mounting brackets
are available. Bars are plated copper with M6 and M5 tapped
holes to provide a common point for grounding equipment. Fits all
enclosures if mounted vertically. See table for horizontal mounting.
Bulletin: P20
Catalog Number
Description
Length
mm/in.
Number of
Holes and
Screws M6
Number of
Holes and
Screws M5
PGS2K Fits 400-mm deep frame
front-to-back horizontally
200
7.87
3/5 10/10
PGS4K Fits 600-mm deep frame
front-to-back horizontally
400
15.75
9/11 20/20
PGS6K Fits 800-mm deep frame
front-to-back horizontally
600
23.62
15/17 30/31
PROLINE GROUNDING KIT
The Grounding Kit allows a ProLine
or ProLine G2 enclosure to be
grounded to VDE specications.
Includes six 12-gauge wires 411 mm
(16.19) long with ring terminations
and M6 mounting hardware.
Bulletin: P20
Catalog Number
Wire
Size
Length Between
Ring Terminals
mm/in.
Ring Terminal
Hole Diameter
mm/in.
PGK 12 ga. 411
16.19
7
.29
REPLACEMENT PANEL-MOUNT HARDWARE KIT
Replacement hardware kit for panel mounting and grounding.
Suitable for CONCEPT enclosures. Hardware kit comes with
M8 panel mounting nuts, panel grounding hardware and sealing
washers.
Bulletin: A80
Catalog Number Description
GRDM8PMHDWK Panel Mount Hardware Kit
GROUNDING KIT
These grounding kits come with mounting hardware, ground label
and installation instruction. Cables are not included.
Bulletin: A80
Catalog Number
Description
Hardware Size
SMGDK Small grounding kit 10-32
lRGGDK Large grounding kit 1/4-20
lRGGDKSS Large grounding kit for stainless steel M6