Cut Sheet

Fresh Air enclosure cooling Accessories
PH 763.422.2211NVENT.COM/HOFFMAN ThermAl mAnAgemenT 4
Spec-00309 K
venT KiT
Includes a stylized louvered cover and lter package. Use as an air
inlet when a cooling fan is mounted in an enclosure or use two vent
kits to allow passive airow. Mounting hardware included. Vent Kit
requires cutout shown in diagram. Available in gray (RAL 7042) or
black.
cATAlog numBers
XPV32 PPV32B
uniT consTrucTion
Dimension H x W x D (in./mm) 11.81 x 7.88 x 1.03
300 x 200 x 26
11.81 x 7.88 x 1.03
300 x 200 x 26
Color Gray Black
venTilATor
Designed to t most metallic and non-metallic enclosures. Proper
installation will provide rainproof ventilation but will not meet
Type 4 or 12 requirements. Kit includes mounting hardware, and
instructions.
Supplied screws are 13-mm (.515-inch) long. Some applications may
require longer screws.
cATAlog numBers
ANMV6 ANMV3
Design DATA
Description Large nonmetallic vent Small nonmetallic vent
FilTer ADhesive
Designed to maximize the eciency of all expanded aluminum air
lters. Use of Filter Adhesive doubles the dust-retention capacity of
the lter. Adhesive contains a low-viscosity water-soluble oil which
absorbs dirt particles trapped on the surface of the lter. Through
the circulation of the oil, a renewed impurity-absorbing surface is
constantly established. Washing with water will remove dust, dirt
and other impurities. Once the lter is dry, recoat with adhesive.
cATAlog numBers
AFLTAD
Design DATA
Description Spray Adhesive