Cut Sheet

Canadian Cabinets and splitters Canadian SplitterS

nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICECommerCial1

Spec-00058 F

splitter trough, type 1

industry standards

CSA C22.2 No. 76, File No. 42184: Type 1

NEMA/EEMAC Type 1

IEC 60529, IP30

appliCation

With pre-installed terminal blocks for three- and four-wire power

distribution systems, this trough splits feeder circuit conductors

into multiple branch circuit conductors.

Features

•

Various size knockouts on each side

•

Hinged covers

•

Mounting holes in back

•

Includes single-point ground lug

•

Ground Splitter (ground bar) accessory available

speCiFiCations

•

14 gauge steel

Finish

ANSI61graypolyesterpowderpaintnishinsideandout

aCCessories

PAGE 1
Canadian Cabinets and Splitters Canadian Splitters Splitter Trough, Type 1 FINISH ANSI 61 gray polyester powder paint finish inside and out ACCESSORIES See also Accessories. Splitter Trough Block Assemblies Ground Splitter Bar Touch-Up Paint Bulletin: S90T INDUSTRY STANDARDS CSA C22.2 No. 76, File No.
PAGE 2
Canadian Cabinets and Splitters Canadian Splitters Standard Product Type 1 Splitter Trough Catalog Number AST283R AST284R AST383R AST384R AST483R AST484R AST2123R AST2124R AST3123R AST3124R AST4123R AST4124R AST3223R AST3224R AST4223R AST4224R AST5223R AST5224R AST6223R AST6224R AST3403R in. 24.00 x 6.00 x 4.50 24.00 x 6.00 x 4.50 36.00 x 6.00 x 4.50 36.00 x 6.00 x 4.50 48.00 x 6.00 x 4.50 48.00 x 6.00 x 4.50 24.00 x 6.00 x 4.50 24.00 x 6.00 x 4.50 36.00 x 6.00 x 4.50 36.00 x 6.00 x 4.50 48.00 x 6.00 x 4.