Cut Sheet
Wiring Troughs Troughs
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEWire and Cable ManageMenT1
Spec-01224 F
angled Trough, neMa Type 1
indusTry sTandards
UL 870 Listed; File No. E27524
cUL CSA C22.2 No. 26 Listed; File No. E27524
NEMA/EEMAC: Type 1
IEC 60529, IP30
appliCaTion
The nVent HOFFMAN Angled Trough cuts total installation time
by 80%. It eliminates the need for costly 90-degree conduit bends
and offers exibility for wire distribution, making it a time and cost
saving solution for contractors. The unique design allows conduit
runs through the front of the enclosure, and can be mounted in any
corner.
FeaTures
•
Flexible install allows conduit runs through six sides of enclosure,
including the front
•
Cleaner appearance requiring less real estate on the wall
•
Uniquely designed cover is removable and easy to assemble with
half the number of screws
•
Easy mounting via holes on the back of the enclosure
•
Shipped completely assembled with no end caps to install
speCiFiCaTions
• 16 or 14 gauge steel
Finish
• ANSI 61 gray polyester powder paint nish inside and out
learn More:
https://hoffman.nvent.com/en/hoffman/Angled-Trough-NEMA-
Type-1
CalCulaTe your saVings:
http://angledtrough.com
BULLETIN: F40AT