Cut Sheet

Mounting options COMPACT PendAnT ArM SySTeM, SerieS 2
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEHMi (HuMan-MacHine interface)1
Spec-00350 J
coMpact pendant arM series 2, type 12
industry standards
NEMA/EEMAC Type 12
IEC 60529, IP55
DIN 40050
appLication
COMPACT Series 2 Pendant Arms allow operators to easily move
controls into and out of position as needed, and they are easily
mounted to a machine, wall or oor. Offering both superior load-
bearing capacity and functional reliability, the COMPACT Series 2
Pendant Arm has a maximum load of 101 lb. (45.8 kg) at 3.3 ft. (1
m) and is recommended for use with INLINE, CC2000, CC4000 and
CONCEPT HMI enclosures as well as Consolets.
specifications
• Cast aluminum couplings and extruded aluminum tubing. Series
components provide excellent structural strength.
• Multiple coupling types and three standard tube lengths (500,
1000 and 1500 mm) combine to form numerous congurations as
conduits for equipment wiring (see conguration guide)
•
Removable access plates simplify cable installation inside ttings
• Heavy duty bearings in all movable joints for convenient, smooth
operation and enhanced durability
• Deep tube ttings in all couplings
• Adjustable set screws allow accurate alignment of supporting
tubes
• Oil-resistant neoprene gasket
finisH
Couplings and access plates have RAL 7035 light-gray polyester
powder paint nish. Tubing is anodized aluminum.
 Standard Cutout for Mounting
Dimensions for Cutout
Set-Up Joint
in./mm
Vertical or Horizontal Wall Joint
in./mm
Flange or Flange Elbow Coupling/Swivel Tilt Straight or 90° Elbow
in./mm
Wall Flange or Base Bracket
in./mm
Rotational Base
in./mm
ØD 1.58
40
2.76
70
1.58
40
—
—
1.58
40
E 3.54
90
3.54
90
2.36
60
3.54
90
3.54
90
F 3.54
90
4.33
110
2.36
60
3.54
90
3.54
90
ØG 0.35
9
0.35
9
0.26
7
0.35
9
0.35
9
See product drawings for alternate shallow enclosure mounting.