Cut Sheet
Mounting options COMPACT PendAnT ArM SySTeM, SerieS 2
PH 763.422.2211nVent.com/HOFFMAN HMi (HuMan-MacHine interface) 8
Spec-00350 J
sWiVeL tiLt straigHt
Mounts between pendant arm and
HMI enclosure to provide both swivel
and tilt options for the machine
operator. Swivel allows 300-degree
maximum rotation. Tilt allows
innite adjustment from horizontal
to 30 degrees. Cast aluminum
nished in RAL 7035 light-gray
polyester powder paint. Installation
hardware, mounting fasteners and
gasket included.
Maximum load is 66 lb. (30 kg).
Bulletin: CS4
Catalog Number Weight (lb.)
CCS2StlG 7.0
sWiVeL tiLt 90-degree eLboW
Mounts between pendant arm and
HMI enclosure to provide both swivel
and tilt options for the machine
operator. A 90-degree elbow is
incorporated into this design.
Swivel allows 300-degree maximum
rotation. Tilt allows innite
adjustment from horizontal to 30
degrees. Cast aluminum nished
in RAL 7035 light-gray polyester
powder paint. Installation hardware,
mounting fasteners and gasket are
included.
Maximum load is 66 lb. (30 kg).
Bulletin: CS4
Catalog Number Weight (lb.)
CCS2eStlG 7.5