Cut Sheet

ManualsBrandsnVent Hoffman ManualsBoxes & EnclosuresHandle Kit, For Concept Wall Enclosures, Non-Locking, Zinc Die Cast

CONCEPT ACCEssOriEs CONCEPT ACCEssOriEs

nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEACCEssOriEs1

Spec-00186 U

CONCEPT PANEl CONvErsiON KiT

Panel Conversion Kit adapts enclosure for mounting standard

NEMA-style panels in Concept enclosures. Bracket attaches to

rear collar stud. Kit includes four adapter plates and hardware for

mounting panel.

Bulletin: CWY

Catalog Number

Material

Fits CONCEPT Enclosure

CCPM4 Steel When A x B is equal to or less than 30.00 x 30.00 in. (762 x 762 mm)

swiNg-OuT rACK FrAmE

Swing-Out Rack Frames provide 120-degree swing-out access for

19-in. rack equipment. Welded rack frame mounts to front ange.

Distance from frame to door surface is 1.32 in. (33 mm) for solid

doors and 1.07 in. (27 mm) for window doors. Frame is painted

white. Mounting hinge and latching hardware provided.

Order separately clip nut package catalog number XNM5 and

screws XSM5 (metric) or AN1032 and screws AS1032 (English).

Swing-Out Rack Frame cannot be mounted on adjustable mounting

kit.

Bulletin: CWY

Catalog Number

Material

Fits Enclosure A x B

CSF2424 Painted steel 24.00 x 24.00 in. (610 x 610 mm)

CSF3024 Painted steel 30.00 x 24.00 in. (762 x 610 mm)

CSF3624 Painted steel 36.00 x 24.00 in. (914 x 610 mm)

CONCEPT AdjusTAblE-dEPTh mOuNTiNg KiTs

Adjustable-Depth Mounting Kits provide mounting means for

installing panels, swing-out panels, DIN rails, rack angles, mounting

channels or grid straps at any depth from front to rear of enclosure.

Kits include slide mechanisms and hardware. Use two kits when

enclosure has six collar studs for mounting panel. Kit catalog

numbers ending in 2 contain two slide mechanisms; catalog

numbers ending in 4 contain four slide mechanisms.

Dead Front Panel and Swing-Out Rack Frame cannot be mounted on

adjustable mounting kit.

Bulletin: CWY

Catalog Number

Fits CONCEPT

Enclosure (in.)

Fits CONCEPT

Enclosure (mm)

CAM64 when C = 6.00 when C = 152

CAM82 when C = 8.00 when C = 203

CAM84 when C = 8.00 when C = 203

CAM102 when C = 10.00 when C = 254

CAM104 when C = 10.00 when C = 254

CAM122 when C = 12.00 when C = 305

CAM124 when C = 12.00 when C = 305

CAM162 when C = 16.00 when C = 406

CAM164 when C = 16.00 when C = 406

CAM202 when C = 20.00 when C = 508

CAM204 when C = 20.00 when C = 508

Summary of content (6 pages)

PAGE 1
CONCEPT Accessories CONCEPT Accessories Concept Panel Conversion Kit Panel Conversion Kit adapts enclosure for mounting standard NEMA-style panels in Concept enclosures. Bracket attaches to rear collar stud. Kit includes four adapter plates and hardware for mounting panel. Bulletin: CWY Catalog Number CCPM4 Swing-Out Rack Frame Material Steel Fits CONCEPT Enclosure When A x B is equal to or less than 30.00 x 30.00 in. (762 x 762 mm) Swing-Out Rack Frames provide 120-degree swing-out access for 19-in.
PAGE 2
CONCEPT Accessories CONCEPT Accessories Mounting Channels Mounting Channels provide mounting framework for installing DIN rails and grid straps at various positions within the enclosure. Channels can be mounted vertically or horizontally to collar studs or to the slide mechanisms of the adjustable-depth mounting kit. Kit includes two channels. Bulletin: CWY Catalog Number CMC12 CMC16 CMC20 CMC24 CMC60 Rack-Mount Angles Fits CONCEPT Enclosure when A or B = 12.00 in. (305 mm) when A or B = 16.00 in.
PAGE 3
CONCEPT Accessories CONCEPT Accessories Concept Panels These panels are taller and wider than corresponding NEMA-size panels. Panels are 14 or 12 gauge steel and painted white or have a conductive finish. Panels have a formed flange along any side that is longer than 22.20 in. (564 mm).
PAGE 4
CONCEPT Accessories CONCEPT Accessories Concept Swing-Out Panels CSPB Panels Fits Enclosure Size (in.) 12.00 x 12.00 16.00 x 12.00 16.00 x 16.00 16.00 x 20.00 20.00 x 16.00 20.00 x 20.00 20.00 x 24.00 24.00 x 16.00 24.00 x 20.00 24.00 x 24.00 24.00 x 30.00 30.00 x 20.00 30.00 x 24.00 30.00 x 30.00 36.00 x 24.00 36.00 x 30.00 36.00 x 36.00 42.00 x 36.00 48.00 x 24.00 48.00 x 36.00 60.00 x 36.
PAGE 5
CONCEPT Accessories CONCEPT Accessories Door Stop Kit Door Stop Kit secures the door in the open position. Kit can be installed at the top or bottom of a door which opens horizontally. Door opening angle can be easily adjusted by means of a wing nut. Stop arm slides neatly out of the way when the door is closed. All parts are plated. Mounting hardware included.
PAGE 6
CONCEPT Accessories CONCEPT Accessories Notes nVent.com/HOFFMAN PH 763.422.