Cut Sheet

CONCEPT ACCEssOriEs CONCEPT ACCEssOriEs
PH 763.422.2211nVent.com/HOFFMAN ACCEssOriEs 2
Spec-00186 U
mOuNTiNg ChANNEls
Mounting Channels provide mounting framework for installing
DIN rails and grid straps at various positions within the enclosure.
Channels can be mounted vertically or horizontally to collar studs or
to the slide mechanisms of the adjustable-depth mounting kit. Kit
includes two channels.
Bulletin: CWY
Catalog Number Fits CONCEPT Enclosure
CMC12 when A or B = 12.00 in. (305 mm)
CMC16 when A or B = 16.00 in. (406 mm)
CMC20 when A or B = 20.00 in. (508 mm)
CMC24 when A or B = 24.00 in. (610 mm)
CMC60 when A or B = 60.00 in. (1524 mm)
rACK-mOuNT ANglEs
Rack-Mount Angles are a mounting means for 19-in. rack equipment
in 24-in. wide enclosures. L-shaped through-hole angles attach
to enclosure ange or the adjustable-depth mounting kit. Holes
are .281 in. (7 mm) in diameter. Clear plated 14 gauge steel
construction. Mounting hardware included.
Order separately clip nut package catalog number XNM5 and screws
XSM5 (metric) or AN1032 and screws AS1032 (English).
Bulletin: CWY
Catalog Number
Fits CONCEPT Enclosure
Rack Units
CRA12tH when A = 24.00 in. (610 mm) 12
CRA16tH when A = 30.00 in. (762 mm) 16
diN3 rAil KiTs
DIN3 Rail Kits supply mounting surfaces for DIN mount snap-on
devices in either DIN 1, DIN 3 or CENELEC styles. Rails attach
vertically or horizontally to rear collar stud or to mounting channels.
Kit includes three rails and mounting hardware.
Bulletin: CWY
Catalog Number Fits Concept Enclosure
CDR3P12 when A or B = 12.00 in. (305 mm)
CDR3P16 when A or B = 16.00 in. (406 mm)
CDR3P20 when A or B = 20.00 in. (508 mm)
CDR3P24 when A or B = 24.00 in. (610 mm)