Cut Sheet

ManualsBrandsnVent Hoffman ManualsBoxes & EnclosuresD-BOX 36X24X12, Gray

Wall-Mount Cabinets D-BOX Wall-MOunt EnclOsurE anD accEssOriEs

nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEnetWorking1

Spec-00083 K

Spec-00083

D-boX, type 1

inDustry stanDarDs

UL 2416 Listed; File No. E230874

UL 508A Listed; Type 1; File Number E61997

cUL Listed per CSA C22.2 No. 182.4; File No. E230874

Ventilation complies with UL 60950

Telcordia NEBS

Requirements: Physical Protection, GR-63-CORE,

Zone 4. Tested with 100 lb. (45.4 kg) of equipment installed.

Designed in accordance with BICSI TDMM Tenth edition, Chapter 7,

Telecommunication Enclosures (TE)

EIA 310-D

IEC 60529, IP40

appliCation

Ideal for retail applications where it is necessary to house 19-in.

network equipment in a public location, the horizontally-oriented

D-BOX is a low-profile cabinet with a hinged door for convenient

front access and a combination of fixed and rotating rack angles to

accommodate varying equipment sizes.

Features

•

Spring-loaded, self-retained hinge pins allow door removal

•

Reversible door fits flush to body with no exposed corners

•

Knockouts for 4-in. fan on top and bottom of enclosure

•

Wiring knockouts (7/8 in., 1-3/8 in., and 3 in.) on top and bottom of

enclosure. Two 3-in. cable entry knockouts on back.

•

120-degree door opening

•

Multiple cable tie-down points on back of enclosure

•

Quarter-turn latch with key lock

• Keyhole mounting slots spaced 16.00 in. (406 mm) on center for

easy enclosure mounting

• Bosses provided for mounting accessories such as cable spools

• Self-grounding mounting angles made of 12 gauge galvanized

steel

• Patch panel 4U mounting angles rotate down for access

• Flange around door opening protects interior

• Bonding provision on door

• Ground stud on body

• EIA Universal 5/8 - 5/8 - 1/2 in. vertical mounting hole pattern

matches industry standards. Holes are tapped 10-32.

• Includes package of twenty 10-32 mounting screws

speCiFiCations

• Door manufactured from 14 gauge mild steel

• Body manufactured from 16 gauge mild steel

FinisH

Pretreated steel coated with RAL 7035 light-gray textured, low-

gloss polyester powder paint. Other finishes available—contact

Hoffman Customer Service.

loaD rating

100 lb. (45.4 kg)

Bulletin: DWS1

Summary of content (4 pages)

PAGE 1
Wall-Mount Cabinets D-BOX Wall-Mount Enclosure and Accessories Spec-00083 D-BOX, Type 1 INDUSTRY STANDARDS • UL 2416 Listed; File No. E230874 UL 508A Listed; Type 1; File Number E61997 cUL Listed per CSA C22.2 No. 182.4; File No. E230874 Ventilation complies with UL 60950 Telcordia NEBSTM Requirements: Physical Protection, GR-63-CORE, Zone 4. Tested with 100 lb. (45.4 kg) of equipment installed.
PAGE 2
Wall-Mount Cabinets D-BOX Wall-Mount Enclosure and Accessories Standard Product Catalog Number DBS24248G DBS36248G DBS48248G DBS242412G DBS362412G DBS482412G nVent.com/HOFFMAN AxBxC in. 24.00 x 24.00 x 8.34 36.00 x 24.00 x 8.34 48.00 x 24.00 x 8.34 24.00 x 24.00 x 12.34 36.00 x 24.00 x 12.34 48.00 x 24.00 x 12.34 PH 763.422.2661 AxBxC mm 610 x 610 x 212 915 x 610 x 212 1220 x 610 x 212 610 x 610 x 313 915 x 610 x 313 1220 x 610 x 313 H (in.) 22.00 34.00 46.00 22.00 34.00 46.
PAGE 3
Wall-Mount Cabinets D-BOX Wall-Mount Enclosure and Accessories Bonding and Grounding Kit Provides the cable and mounting hardware required to ground equipment to the door and the body of the cabinet. Catalog Number DBGRDK Description Bonding and Grounding Kit Bulletin: DWS1 Duplex Outlet Kit 15 A duplex outlet is factorymounted in three-sided, plated steel enclosure. Outlet enclosure mounts on hinge side of door in lower corner of cabinet. Mounting hardware provided.
PAGE 4
Wall-Mount Cabinets D-BOX Wall-Mount Enclosure and Accessories Fan Filter and Finger Guard Kit Low-density filter kit for 4-in. (102-mm) and 6-in. (152-mm) fans. Can also be used as vent. Filter is removable and can be cleaned and reused. Mounting hardware included. Catalog Number AFLTR4LD AFLTR6LD Description Fan Filter and Finger Guard Kit Fan Filter and Finger Guard Kit Fits 4-in. fans 6-in. fans Bulletin: DTHRM, DWS1 Padlock Kit Kit includes field installable hasp and staple.