Cut Sheet
OUTSIDE PLANT PRODUCTS COMLINE OSP WaLL-MOuNt CabINEt PaCk agE aNd aCCESSOrIES
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICENETWORKING1
Spec-00215 Q
COMLINE OSP PACKAGE, TYPE 4X
Rack Mount devices
shown not included
Custom cabinet shown
INDUSTRY STANDARDS
UL 508A Listed; Type 3, 3R, 4, 4X, 12; File No. E61997
CSA: Type 3, 3R, 4, 4X, 12
NEMA/EEMAC Type 3, 3R, 4, 4X, 12
EC60529, IP66
Designed to meet Telcordia NEBS GR-487, GR-63 and IEC 48D
EIA 310-D with 19 in. spacing for rack equipment
Meets BICSI TDMM, Tenth Edition, Chapter 7, Telecommunication
Enclosures (TE)
Cabinet is RoHS compliant
NEBS is a trademark of Telcordia
APPLICATION
A complete, off-the-shelf package for 19-in. rack equipment,
lightweight COMLINE OSP Wall-Mount Cabinets are constructed
of corrosion-resistant aluminum with a foam-in-place gasket that
secures and protects sensitive equipment in outdoor applications.
Available with or without back-up battery compartment.
FEATURES
•
Solar shield helps keep enclosure interior cool when cabinet is
installed outdoors and directs liquids away from cabinet opening;
can be removed for indoor installations
•
Foam-in-place gasket provides environmental seal
•
Padlocking L-Handle provides a tight, secure door seal
•
Doorstop holds door in place during service for easier and faster
maintenance
• Heavy-duty hinged door is easily removed to facilitate equipment
installation and removal. Maximum door load 50 lb. (22.7 kg)
• Rack angles adjustable front-to-rear of cabinet
• GlandplatesavailablewithcutoutsthattHoffmanT15,T20
and CR23 air conditioners and Hoffman XR20 and XR29 heat
exchangers (Indoor use only)
• Radius corners on cabinet eliminate sharp edges
• Stainless steel fasteners resist corrosion to maintain professional
appearance
• Pole mounting kits available for all sizes
• Pad mounting plinth available for 600mm deep cabinets
• Battery compartment has front vented captivated door.
• Note – SR20 and SR29 are for indoor use only.
SPECIFICATIONS
• Rack angles have EIA universal standard square hole spacing
• Eighth-inch thick, depending on cabinet size
• Seamscontinuouslyweldedandgroundsmoothforanished
appearance
• Body includes studs for ground bar and rear mounting studs for
wood panel
FINISH
RAL 7035 light-textured low-gloss polyester urethane powder
coatingoveriron-phosphate-treatedsurface.Customnishes
available:consultyourlocalHoffmansalesoce.
BULLETIN: DCOM
Standard Product COMLINE Wall-Mount Enclosure Packages
Catalog Number
AxBxC in. AxBxC mm P ( in.) P (mm)
Rack Units
ECL606050P 23.62 x 23.62 x 19.68 600 x 600 x 500 17.47 444 12
ECL906050P 35.43 x 23.62 x 19.68 900 x 600 x 500 30.47 774 18
ECL907060P 35.43 x 27.56 x 23.62 900 x 700 x 600 30.47 774 18
ECL1207060P 47.24 x 27.56 x 23.62 1200 x 700 x 600 30.47 774 25
Standard ProductCOMLINE with Battery Compartment
Catalog Number
AxBxC in. AxBxC mm
Rack Units
ECL606050PB 38.62 x 23.62 x 19.69 981 x 600 x 500 12
ECL906050PB 50.43 x 23.62 x 19.69 1281 x 600 x 500 18
ECL907060PB 50.43 x 27.56 x 23.62 1281 x 700 x 600 18
ECL1207060PB 62.24 x 27.56 x 23.62 1581 x 700 x 600 25