Cut Sheet

ManualsBrandsnVent Hoffman ManualsConduitWireway, Lay-In, Type 12, Cover, 2-1/2" x 2-1/2" x 6", Steel, Gray

LAYIN WIREWAY L ay-In nEMa TypE 12 WIrEWay

nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEWIRE AND CABLE MANAGEMENT1

Spec-00321 J

Spec-00321

LAYIN WIREWAY, NEMA TYPE 12

INDUSTRY STANDARDS

UL 870 Listed; File No. E27524

NEMA/EEMAC Type 12

JIC standards EGP-1-1967 and EMP-1-1967

CSA, File No. 42184, Type 1

IEC 60529, IP54

APPLICATION

Used primarily in industrial applications to protect wiring against

exposure to oil and other contaminants, this gasketed wireway

features quick-release latches for easy access and an opening

on one side so wires and cables can be laid in along the entire

run without pulling. Available in multiple sizes, this wireway’s

finish color and texture can be customized to meet application

requirements.

FEATURES

• Seams continuously welded and ground smooth

• No holes or knockouts

• Smooth, rounded edges on all sections and fittings

• Butt hinges and strong latches

• Quick-release cover latches

• Oil-resistant gasket and adhesive

• Gasketed quick-release sealing plate

SPECIFICATIONS

• 14 gauge steel covers and bodies

• 10 gauge steel end flanges

FINISH

• ANSI 61 gray polyester powder finish inside and out over

pretreated surfaces

• Box connector is gray ANSI 61

• LSGQR sealing plate and quick-release latches are plated

r(OERZ2XWVLGH7RS2SHQLQJ

'URS+DQJHU

6WUDLJKW6HFWLRQ

&URVV)LWWLQJ

7HOHVFRSH)LWWLQJ

7UDQVSRVLWLRQ6HFWLRQ

-XQFWLRQ%R[

r(OERZ

2XWVLGH2SHQLQJ

r(OERZ

&RXQWHUFORFNZLVH

r(OERZ

2XWVLGH2SHQLQJ

r(OERZ

7RS2SHQLQJ

7HH)LWWLQJ

2XWVLGH7RS2SHQLQJ

7HH)LWWLQJ7RS2SHQLQJ

r(OERZ

7RS2SHQLQJ

5HGXFHU

&ORVXUH3ODWH

%UDFNHW+DQJHU

r(OERZ

,QVLGH2SHQLQJ

r(OERZ

,QVLGH2SHQLQJ

Summary of content (12 pages)

PAGE 1
Lay-In Wireway Lay-In NEMA Type 12 Wireway Spec-00321 Lay-In Wireway, NEMA Type 12 APPLICATION Used primarily in industrial applications to protect wiring against exposure to oil and other contaminants, this gasketed wireway features quick-release latches for easy access and an opening on one side so wires and cables can be laid in along the entire run without pulling. Available in multiple sizes, this wireway’s finish color and texture can be customized to meet application requirements.
PAGE 2
Lay-In Wireway Lay-In NEMA Type 12 Wireway Standard Product Selection Matrix Description 6.00-in. (152-mm) Straight Section 12.00-in. (305-mm) Straight Section 24.00-in. (610-mm) Straight Section 36.00-in. (914-mm) Straight Section 48.00-in. (1219-mm) Straight Section 60.00-in. (1524-mm) Straight Section 120.00-in.
PAGE 3
Lay-In Wireway Lay-In NEMA Type 12 Wireway Straight Section Available in lengths from 6.00 in. (152 mm) to 120.00 in. (3048 mm). Bulletin: F10 Straight Sections Catalog Number F22L06 F22L12 F22L24 F22L36 F22L48 F22L60 F22L120 F44L06 F44L12 F44L24 F44L36 F44L48 F44L60 F44L120 F66L06 F66L12 F66L24 F66L36 F66L48 F66L60 F66L120 F88L06 F88L12 F88L24 F88L36 F88L48 F88L60 F88L120 F126L06 F126L12 F126L24 F126L36 F126L48 F126L60 F126L120 a AxBxC in. 2.50 x 2.50 x 6.00 2.50 x 2.50 x 12.00 2.50 x 2.50 x 24.00 2.
PAGE 4
Lay-In Wireway Lay-In NEMA Type 12 Wireway Cut-Off Fitting, Lay-In For lengths of 9.00 in. (229 mm) to 15.00 in. (381 mm) only. Body comes in two pieces. Shorten body and cover to the desired length and weld together. Bulletin: F10 Catalog Number F22LXL F44LXL F66LXL F88LXL F126LXL AxB in. 2.50 x 2.50 4.00 x 4.00 6.00 x 6.00 8.00 x 8.00 12.00 x 6.00 Sealing Plates, Typea Flat Flat Flat Flat Flat AxB mm 64 x 64 102 x 102 152 x 152 203 x 203 305 x 152 Sealing Plates, Qty.
PAGE 5
Lay-In Wireway Lay-In NEMA Type 12 Wireway 90-Degree Elbow—Outside Top Opening This elbow fitting allows a vertical drop to equipment below at a 90-degree corner while maintaining the top opening lay-in feature. Bulletin: F10 AxB in./mm 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 Catalog Number F44LE9AC F66LE9AC F88LE9AC a 90-Degree Elbows Bulletin: F10 F44LE9A F66LE9A F88LE9A F126LE9A Flat 2 Flat 2 H in./mm 5.00 127 6.00 152 7.
PAGE 6
Lay-In Wireway Lay-In NEMA Type 12 Wireway 45-Degree Elbows Inside Opening Because sections of lay-in wireway can be mounted with covers oriented in any direction, three different 45-degree elbows are available. Proper selection allows the user to maintain the same access and thereby preserve the lay-in feature for right-angle installations. Bulletin: F10 F44LE45A F66LE45A F88LE45A F126LE45A F44LE45B F66LE45B Top Opening Catalog Number F22LE45A Catalog Number F22LE45B AxB in./mm 2.50 x 2.
PAGE 7
Lay-In Wireway Lay-In NEMA Type 12 Wireway Tee Fitting—Top Opening This fitting is used when the covers of all three branches of the wireway run are open along the same side. Bulletin: F10 AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 12.00 x 6.00 305 x 152 Catalog Number F22LTA F44LTA F66LTA F88LTA F126LTA Sealing Plates, Typea Flat Sealing Plates, Qty.a 2 Flat 2 Flat 2 Flat 2 Flat 2 G in./mm 8.50 216 10.00 254 12.00 305 14.00 356 18.
PAGE 8
Lay-In Wireway Lay-In NEMA Type 12 Wireway Closure Plate Used to seal the end of a wireway section or run. Bulletin: F10 Catalog Number F22LP Sealing Plates, Typea 90° Sealing Plates, Qty.a 1 F44LP 90° 1 F66LP 90° 1 F88LP 90° 1 F126LP 90° 1 D in./mm 3.88 99 5.38 137 7.62 194 9.62 244 13.62 346 E in./mm 3.88 99 5.38 137 7.62 194 9.62 244 7.62 194 a Each sealing plate also includes one gasket and one set of screws to join sections.
PAGE 9
Lay-In Wireway Lay-In NEMA Type 12 Wireway Drop Hanger Hangers are used to support a wireway run. The drop hanger is normally attached to an overhead beam or ceiling. Bulletin: F20 Catalog Number F22HD Sealing Plates, Typea None Sealing Plates, Qty.a 0 F44HD None 0 F66HD None 0 F88HD None 0 S in./mm 9.25 235 11.75 298 15.25 387 20.56 522 T in./mm 4.50 114 6.00 152 8.12 206 12.12 308 a Each sealing plate also includes one gasket and one set of screws to join sections.
PAGE 10
Lay-In Wireway Lay-In NEMA Type 12 Wireway Transposition Sections 90-Degree Elbow - Clockwise These fittings are used when it is necessary to rotate the open side of the wireway run by 90 degrees and still retain the lay-in feature. F44LE9KT Bulletin: F10 F66LE9KT Clockwise Catalog Number F22LKT F44LKT F66LKT a Catalog Number F22LE9KT AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 Sealing Plates, Type Flat a a Sealing Plates, Qty.
PAGE 11
Lay-In Wireway Lay-In NEMA Type 12 Wireway Barrier Kits, Bracket-Mounted Spring steel brackets hold barriers in place by friction fit inside wireway. Order barrier and bracket separately. Recommended spacing in increments of 3 ft. (.9 m). Bulletin: F10 Compartment Barriers Catalog Number F44B360 F66B560 Sealing Plates (qty.)a 1 pkg.a (5 pcs.) 1 pkg.a (5 pcs.) W (in.) 3.00 4.50 W (mm) 76 114 87797154 a Package consists of five barriers.
PAGE 12
Lay-In Wireway Lay-In NEMA Type 12 Wireway Notes nVent.com/HOFFMAN PH 763.422.