Cut Sheet
Lay-In WIreWay Lay-In nEMa TypE 1 GaLvanIzEd WIrEWay
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEWIre and CabLe ManageMent1
Spec-00134 N
Lay-In gaLVanIZed WIreWay, neMa tyPe 1
IndUStry StandardS
UL 870 Listed; File No. E27524
cUL Listed per CSA C22.2 No. 26; File No. E27524
NEMA/EEMAC: Type 1
IEC 60529, IP30
aPPLICatIOn
This galvanized wireway features an open design on one side so
wires and cables can be laid in safely along the entire run without
pulling. A variety of lengths and ttings accommodate design
requirements.
FeatUreS
• Keyhole screw slots on at covers
• Open top assembly
• Available with or without knockouts on wireway sides
SPeCIFICatIOnS
• 16 or 14 gauge galvanized steel covers and bodies
FInISH
Unpainted galvanized steel
Telescope
Fitting
Cross
Fitting
90° Flush
Tee
90° Elbow
Reducer
Support
Hanger
Open
Adapter
90° Elbow -
Tee-Cross
90° Elbow -
Outside
Opening
Panel Adapter
45° Elbow
Drop and
Bracket Hanger
Sweep Tee
Straight Section
90° Elbow -
Inside Opening
Closure Plate
90° Sweep Elbow
Universal
U-Connector
Barrier
87552189