Cut Sheet

ManualsBrandsnVent Hoffman ManualsConduitWW type 1 reducer

Lay-In WIreWay Lay-In nEMa TypE 1 paInTEd FLaT-CovEr WIrEWay

nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEWIre and CabLe ManageMent1

Spec-00136 M

Lay-In PaInted FLat-COVer WIreWay, neMa tyPe 1

IndUStry StandardS

UL 870 Listed; File No. E27524

cUL Listed per CSA C22.2 No. 26; File No. E27524

NEMA/EEMAC Type 1

IEC 60529

aPPLICatIOn

Protects electrical wiring in applications where dust, dirt, oil and

water are not serious problems. This painted wireway features an

open design on one side so wires and cables can be laid in safely

along the entire run without pulling, a practice that can damage

insulation. A variety of lengths and ttings provide design exibility.

FeatUreS

• Keyhole screw slots on at covers

• Flat cover design allows for ush mounting

• Open top assembly

• Available with or without knockouts

SPeCIFICatIOnS

• 16 and 14 gauge pre-painted steel covers and bodies

FInISH

ANSI 61 gray polyester powder paint nish inside and out.

Telescope

Fitting

Cross

Fitting

90° Flush

Tee

90° Elbow

Reducer

Support

Hanger

Open

Adapter

90° Elbow -

Tee-Cross

90° Elbow -

Outside

Opening

Panel Adapter

45° Elbow

Drop and

Bracket Hanger

Sweep Tee

Straight Section

90° Elbow -

Inside Opening

Closure Plate

90° Sweep Elbow

Universal

U-Connector

Barrier

87552189

Summary of content (8 pages)

PAGE 1
Lay-In Wireway Lay-In NEMA Type 1 Painted Flat-Cover Wireway LAY-IN PAINTED FLAT-COVER WIREWAY, NEMA TYPE 1 APPLICATION Protects electrical wiring in applications where dust, dirt, oil and water are not serious problems. This painted wireway features an open design on one side so wires and cables can be laid in safely along the entire run without pulling, a practice that can damage insulation. A variety of lengths and fittings provide design flexibility.
PAGE 2
Lay-In Wireway Lay-In NEMA Type 1 Painted Flat-Cover Wireway Standard Product Selection Matrix Description 12.00-in. (305-mm) Straight Section with knockouts 12.00-in. (305-mm) Straight Section without knockouts 18.00-in. (455-mm) Straight Section without knockouts 24.00-in. (610-mm) Straight Section with knockouts 24.00-in. (610-mm) Straight Section without knockouts 36.00-in. (914-mm) Straight Section with knockouts 36.00-in. (914-mm) Straight Section without knockouts 48.00-in.
PAGE 3
Lay-In Wireway Lay-In NEMA Type 1 Painted Flat-Cover Wireway Straight Sections Catalog Number F22T112GVPWK F22T112GVP F22T124GVPWK F22T124GVP F22T136GVPWK F22T136GVP F22T148GVPWK F22T148GVP F22T160GVPWK F22T160GVP F22T1120GVPWK F22T1120GVP F33T160GVP F33T1120GVP F44T112GVPWK F44T112GVP F44T118GVP F44T124GVPWK F44T124GVP F44T136GVPWK F44T136GVP F44T148GVPWK F44T148GVP F44T160GVPWK F44T160GVP F44T172GVPWK F44T172GVP F44T1120GVPWK F44T1120GVP F66T112GVPWK F66T112GVP F66T118GVP F66T124GVPWK F66T124GVP F66T136G
PAGE 4
Lay-In Wireway Lay-In NEMA Type 1 Painted Flat-Cover Wireway 90-DEGREE FLUSH TEE For flush mounting against a vertical or horizontal surface. BULLETIN: F40PF Catalog Number F22GT F33GT F44GT F66GT F88GT F1010GT F1212GT SWEEP TEE For large radius turns. Mounts against vertical or horizontal surfaces. Top and inside covers removable. Catalog Number F22T BULLETIN: F40PF F44T F66T F88T F1010T F1212T J in./mm 6.50 165 8.00 203 10.00 254 12.00 305 14.00 356 16.00 406 AxB in./mm 2.50 x 2.50 64 x 64 4.
PAGE 5
Lay-In Wireway Lay-In NEMA Type 1 Painted Flat-Cover Wireway 90-DEGREE ELBOW-TEE-CROSS Forms left or right 90-degree turns. Can be used as a tee or cross. Use with open adapter for cable entrance in top and bottom. Includes two closure plates. BULLETIN: F40PF Catalog Number F22G90TX F33G90TX F44G90TX F66G90TX F88G90TX F1010G90TX F1212G90TX AxB in./mm 2.50 x 2.50 64 x 64 3.00 x 3.00 76 x 76 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 10.00 x 10.00 254 x 254 12.00 x 12.
PAGE 6
Lay-In Wireway Lay-In NEMA Type 1 Painted Flat-Cover Wireway 45-DEGREE ELBOW For continuous run with 45-degree turns. Top and inside covers removable. Catalog Number F22G45E BULLETIN: F40PF F33G45E F44G45E F66G45E F88G45E F1010G45E F1212G45E TELESCOPE FITTING Length easily adjusts to approximately 12.00 in. (305 mm). No cutting or welding required. BULLETIN: F40PF H in./mm 2.75 70 2.99 76 3.38 86 4.25 108 5.06 129 6.00 152 6.75 171 AxB in./mm 2.50 x 2.50 64 x 64 3.00 x 3.00 76 x 76 4.00 x 4.
PAGE 7
Lay-In Wireway Lay-In NEMA Type 1 Painted Flat-Cover Wireway CLOSURE PLATE Catalog Number F22GCP F22GCPNK F44GCP F33GCPNK F44GCPNK F66GCP F66GCPNK F88GCP F88GCPNK F1010GCP F1010GCPNK F1212GCP F1212GCPNK Closes the end of a wireway section or run. BULLETIN: F40PF AxB in. 2.50 x 2.50 2.50 x 2.50 4.00 x 4.00 3.00 x 3.00 4.00 x 4.00 6.00 x 6.00 6.00 x 6.00 8.00 x 8.00 8.00 x 8.00 10.00 x 10.00 10.00 x 10.00 12.00 x 12.00 12.00 x 12.
PAGE 8
Lay-In Wireway Lay-In NEMA Type 1 Painted Flat-Cover Wireway UNIVERSAL U-CONNECTOR Joins wireway sections and fittings. Top swings aside to retain the lay-in feature. One U-connector required at each wireway joint except telescope fittings, panel adapters, open adapters, closure plates or reducers. BULLETIN: F40PF Catalog Number F22GUC F33GUC F44GUC F66GUC F88GUC F1010GUC F1212GUC AxB in./mm 2.50 x 2.50 64 x 64 3.00 x 3.00 76 x 76 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 10.