Cut Sheet

ManualsBrandsnVent Hoffman ManualsConduitHoff-e Tee

FEEDTHROUGH WIREWAY StainleSS Steel Feed-through neMa type 4X WireWay

nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEWIRE AND CABLE MANAGEMENT1

Spec-00325 G

Spec-00325

STAINLESS STEEL FEEDTHROUGH WIREWAY, NEMA TYPE 4X

INDUSTRY STANDARDS

UL 870 Listed; File No. E27524

NEMA Type 4, 4X, 12

CSA, File No. 42184, Type 1

IEC 60529, IP66

APPLICATION

Stainless steel wireway protects wiring in applications that are

regularly hosed down, very wet or highly corrosive. A complete

selection of sections and fittings is available in multiple sizes for

customization and design flexibility.

FEATURES

• Seams continuously welded and ground smooth

• No holes or knockouts

• Smooth, rounded edges on all sections and fittings

• Butt hinges and external screw clamps

• Oil-resistant gasket and adhesive

SPECIFICATIONS

• 16 gauge Type 304 stainless steel covers and bodies

• 10 gauge stainless steel flanges

FINISH

No. 2B finish.

Standard Product Selection Matrix

Description

4.00 x 4.00 in.

(102 x 102 mm)

6.00 x 6.00 in.

(152 x 152 mm)

12.00-in. (305-mm) Straight Section

F44W12SS

b,c

F66W12SS

b,c

24.00-in. (610-mm) Straight Section

F44W24SS

b,c

F66W24SS

b,c

36.00-in. (914-mm) Straight Section

F44W36SS

b,c

F66W36SS

b,c

48.00-in. (1219-mm) Straight Section

F44W48SS

b,c

F66W48SS

b,c

60.00-in. (1524-mm) Straight Section

F44W60SS

b,c

F66W60SS

b,c

120.00-in. (3048-mm) Straight Section

F44W120SS

b,c

F66W120SS

b,c

Flexible Fitting F44WFFSS F66WFFSS

Telescope Fitting F44WASS F66WASS

45° Elbow

F44WE45SS

b,c

F66WE45SS

b,c

90° Elbow

F44WE90SS

b,c

F66WE90SS

b,c

Tee

F44WTSS

b,c

F66WTSS

b,c

Closure Plate F44WPSS F66WPSS

Reducer Bushings: 6.00-in. (152-mm) to 4.00-in. (102-mm) Center Hole — F66WR44SS

Reducer Bushings: 6.00-in. (152-mm) to 4.00-in. (102-mm) Edge Hole — F66WRE44SS

6.00-in. (152-mm) Nipple

F44WN6SS

F66WN6SS

b,c

Swivel Nipple (Regular)

F44WSCSS

b,c

—

Drop Hanger F44HDSS F66HDSS

Bracket Hanger F44HBSS F66HBSS

Box Connector F44WBSS F66WBSS

Gasket and Screws

F44WGSS F66WGSS

Standard packages of wireway contain one gasket and one set of screws to join sections, except “Tee” fittings which contain two of each, and “Telescope” fittings which contain none. Additional gasket and screw sets may

be ordered by catalog number.

Certified by Canadian Standards Association.

UL 870

TELESCOPE FITTING

Length is easily adjustable from 1.50 in. (38 mm) to 13.50 in. (343

mm). No cutting or welding required.

Bulletin: F22

Catalog Number AxB in./mm

F44WASS 4.00 x 4.00

102 x 102

F66WASS 6.00 x 6.00

152 x 152

All dimensions are to outside surfaces. Allow .12 in. (3 mm) additional for gasket at joints.

Summary of content (6 pages)

PAGE 1
Feed-Through Wireway Stainless Steel Feed-Through NEMA Type 4X Wireway Spec-00325 Stainless Steel Feed-Through Wireway, NEMA Type 4X INDUSTRY STANDARDS UL 870 Listed; File No. E27524 NEMA Type 4, 4X, 12 CSA, File No. 42184, Type 1 IEC 60529, IP66 APPLICATION Stainless steel wireway protects wiring in applications that are regularly hosed down, very wet or highly corrosive. A complete selection of sections and fittings is available in multiple sizes for customization and design flexibility.
PAGE 2
Feed-Through Wireway Stainless Steel Feed-Through NEMA Type 4X Wireway Straight Section Available in lengths from 12.00 in. (305 mm) to 120.00 in. (3048 mm). Bulletin: F22 Catalog Number F44W12SS F44W24SS F44W36SS F44W48SS F44W60SS F44W120SS F66W12SS F66W24SS F66W36SS F66W48SS F66W60SS F66W120SS AxBxC in. 4.00 x 4.00 x 12.00 4.00 x 4.00 x 24.00 4.00 x 4.00 x 36.00 4.00 x 4.00 x 48.00 4.00 x 4.00 x 60.00 4.00 x 4.00 x 120.00 6.00 x 6.00 x 12.00 6.00 x 6.00 x 24.00 6.00 x 6.00 x 36.00 6.00 x 6.00 x 48.00 6.
PAGE 3
Feed-Through Wireway Stainless Steel Feed-Through NEMA Type 4X Wireway Gasket and Screws Bulletin: F22 Standard packages of wireway contain one gasket and one set of screws to join sections, except Tee Fittings which contain two of each and Telescope Fittings which contain none. Additional gasket and screw sets may be ordered by catalog number. Catalog Number F44WGSS F66WGSS AxB in./mm 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 90-Degree Elbow Bulletin: F22 F in./mm 7.00 178 9.00 229 AxB in./mm 4.
PAGE 4
Feed-Through Wireway Stainless Steel Feed-Through NEMA Type 4X Wireway Reducer Bushings Edge Hole Used to reduce to a smaller wireway size. The center hole bushing centers the two wireway sizes relative to each other while the edge hole bushing keeps the top surfaces even. Catalog Number F66WRE44SS Bulletin: F22 AxB in./mm 4.00 x 4.00 102 x 102 D in./mm 7.62 194 E in./mm 7.62 194 Center Hole Catalog Number F66WR44SS D in./mm 7.62 194 AxB in./mm 4.00 x 4.00 102 x 102 E in./mm 7.
PAGE 5
Feed-Through Wireway Stainless Steel Feed-Through NEMA Type 4X Wireway Drop Hanger Bulletin: F22 S in./mm 11.75 298 15.25 387 Catalog Number F44HDSS F66HDSS T in./mm 6.00 152 8.12 206 All dimensions are to outside surfaces. Allow .12 in. (3 mm) additional for gasket at joints. Bracket Hanger Bulletin: F22 Catalog Number F44HBSS F66HBSS P in./mm 6.12 155 8.25 210 R in./mm 3.62 92 3.62 92 U in./mm 5.88 149 7.88 200 All dimensions are to outside surfaces. Allow .12 in.
PAGE 6
Feed-Through Wireway Stainless Steel Feed-Through NEMA Type 4X Wireway Notes nVent.com/HOFFMAN PH 763.422.