Cut Sheet

ManualsBrandsnVent Hoffman ManualsConduitWireway, Type 1, Hinged-Cover, 6" x 6" x 12", Steel, Gray, Includes Knockouts

Lay-In WIreWay Lay-In nEMa TypE 1 HIngEd-CovEr WIrEWay

nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEWIre and CabLe ManageMent1

Spec- 00317 L

Lay-In HInged-Cover WIreWay, neMa type 1

IndUStry StandardS

UL 870 Listed; File No. E27524

cUL Listed per CSA C22.2 No. 26; File No. E27524

NEMA/EEMAC Type 1

IEC 60529, IP30

appLICatIon

This wireway provides convenient cable installation and

maintenance with its top hinged cover and an opening on one side

so wires and cables can be laid in along the entire run without

pulling. A variety of lengths and ttings provide increased design

exibility.

FeatUreS

• Open top assembly

• Removable hinged cover latches with captive screws

• 12.00 x 12.00-in. models available in hinged or non-hinged styles

• Available with or without knockouts on wireway sides

• Covers include captivated plated screw fasteners

SpeCIFICatIonS

• 16 gauge or 14 gauge steel covers and bodies

FInISH

ANSI 61 gray polyester powder paint nish inside and out over

pretreated surfaces.

Telescope

Fitting

Cross

Fitting

90° Flush

Tee

90° Elbow

Reducer

Support

Hanger

Open

Adapter

90° Elbow -

Tee-Cross

90° Elbow -

Outside

Opening

Panel Adapter

45° Elbow

Drop and

Bracket Hanger

Sweep Tee

Straight Section

90° Elbow -

Inside Opening

Closure Plate

90° Sweep Elbow

Universal

U-Connector

Barrier

87552189

Summary of content (8 pages)

PAGE 1
Lay-In Wireway Lay-In NEMA Type 1 Hinged-Cover Wireway Lay-In Hinged-Cover Wireway, NEMA Type 1 APPLICATION This wireway provides convenient cable installation and maintenance with its top hinged cover and an opening on one side so wires and cables can be laid in along the entire run without pulling. A variety of lengths and fittings provide increased design flexibility. FEATURES • • • • • INDUSTRY STANDARDS pen top assembly O Removable hinged cover latches with captive screws 12.00 x 12.00-in.
PAGE 2
Lay-In Wireway Lay-In NEMA Type 1 Hinged-Cover Wireway Standard Product Selection Matrix Description 12.00-in. (305-mm) Straight Section with knockouts 12.00-in. (305-mm) Straight Section without knockouts 18.00-in. (455-mm) Straight Section without knockouts 24.00-in. (610-mm) Straight Section with knockouts 24.00-in. (610-mm) Straight Section without knockouts 36.00-in. (914-mm) Straight Section with knockouts 36.00-in. (914-mm) Straight Section without knockouts 48.00-in.
PAGE 3
Lay-In Wireway Lay-In NEMA Type 1 Hinged-Cover Wireway Straight Sections Catalog Number F22G12WK F22G12 F22G24WK F22G24 F22G36WK F22G36 F22G48WK F22G48 F22G60WK F22G60 F22G120WK F22G120 F44G12WK F44G12 F44G18 F44G24WK F44G24 F44G36WK F44G36 F44G48WK F44G48 F44G60WK F44G60 F44G72WK F44G72 F44G96 F44G120WK F44G120 F66G12WK F66G12 F66G18 F66G24WK F66G24 F66G36WK F66G36 F66G48WK F66G48 F66G60WK F66G60 F66G72WK F66G72 F66G96 F66G120WK F66G120 F88G12 F88G18 F88G24 F88G36 F88G48 F88G60 F88G72 F88G96 F88G120 F1010
PAGE 4
Lay-In Wireway Lay-In NEMA Type 1 Hinged-Cover Wireway 90-Degree Flush Tee For flush mounting against a vertical or horizontal surface. Bulletin: F40PF Catalog Number F22GT F33GT F44GT F66GT F88GT F1010GT F1212GT Sweep Tee For large radius turns. Mounts against vertical or horizontal surfaces. Top and inside covers removable. Catalog Number F22T Bulletin: F40PF F44T F66T F88T F1010T F1212T J in./mm 6.50 165 8.00 203 10.00 254 12.00 305 14.00 356 16.00 406 AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.
PAGE 5
Lay-In Wireway Lay-In NEMA Type 1 Hinged-Cover Wireway 90-Degree Elbow-Tee-Cross Forms left or right 90-degree turns. Can be used as a tee or cross. Use with open adapter for cable entrance in top and bottom. Includes two closure plates. Bulletin: F40PF Catalog Number F22G90TX F33G90TX F44G90TX F66G90TX F88G90TX F1010G90TX F1212G90TX AxB in./mm 2.50 x 2.50 64 x 64 3.00 x 3.00 76 x 76 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 10.00 x 10.00 254 x 254 12.00 x 12.00 305 x 305 G in.
PAGE 6
Lay-In Wireway Lay-In NEMA Type 1 Hinged-Cover Wireway 45-Degree Elbow For continuous run with 45-degree turns. Top and inside covers removable. Catalog Number F22G45E Bulletin: F40PF F33G45E F44G45E F66G45E F88G45E F1010G45E F1212G45E Telescope Fitting Length easily adjusts to approximately 12.00 in. (305 mm). No cutting or welding required. Bulletin: F40PF H in./mm 2.75 70 2.99 76 3.38 86 4.25 108 5.06 129 6.00 152 6.75 171 AxB in./mm 2.50 x 2.50 64 x 64 3.00 x 3.00 76 x 76 4.00 x 4.00 102 x 102 6.
PAGE 7
Lay-In Wireway Lay-In NEMA Type 1 Hinged-Cover Wireway Closure Plate Catalog Number F22GCP F22GCPNK F44GCP F33GCPNK F44GCPNK F66GCP F66GCPNK F88GCP F88GCPNK F1010GCP F1010GCPNK F1212GCP F1212GCPNK Closes the end of a wireway section or run. Bulletin: F40PF Reducer Reduces wireway to a smaller size. Catalog Number F33G22R Bulletin: F40PF F44G22R AxB in. 2.50 x 2.50 2.50 x 2.50 4.00 x 4.00 3.00 x 3.00 4.00 x 4.00 6.00 x 6.00 6.00 x 6.00 8.00 x 8.00 8.00 x 8.00 10.00 x 10.00 10.00 x 10.00 12.00 x 12.
PAGE 8
Lay-In Wireway Lay-In NEMA Type 1 Hinged-Cover Wireway Universal U-Connector Joins wireway sections and fittings. Top swings aside to retain the lay-in feature. One U-connector required at each wireway joint except telescope fittings, panel adapters, open adapters, closure plates or reducers. Bulletin: F40PF Catalog Number F22GUC F33GUC F44GUC F66GUC F88GUC F1010GUC F1212GUC AxB in./mm 2.50 x 2.50 64 x 64 3.00 x 3.00 76 x 76 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 10.00 x 10.