Cut Sheet

ManualsBrandsnVent Hoffman ManualsConduitWireway, Feed-Thru, NEMA 12, Hinge Cover/Screw Clamp, Steel

FEEDTHROUGH WIREWAY Feed-Through NeMA Type 12 WireWAy

nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEWIRE AND CABLE MANAGEMENT1

Spec-00323 L

Spec-00323

FEEDTHROUGH WIREWAY, NEMA TYPE 12

INDUSTRY STANDARDS

UL 870; File No. E27524

NEMA/EEMAC Type 12

JIC standards EGP-1-1967 and EMP-1-1967

CSA, File No. 42184, Type 1

IEC 60529, IP54

APPLICATION

With a variety of fittings and brackets, this traditional-design

wireway is suitable for a broad range of industrial applications.

FEATURES

• Seams continuously welded and ground smooth

• No holes or knockouts

• Smooth, rounded edges on all sections and fittings

• Heavy butt hinges and external screw clamps

• Oil-resistant gasket and adhesive

SPECIFICATIONS

• 14 gauge steel covers and bodies

• 10 gauge steel end flanges

FINISH

ANSI 61 gray polyester powder finish inside and out over pretreated

surfaces. Box connector is gray ANSI 61. Clamps and screws are

plated.

6ZLYHO1LSSOH

%UDFNHW+DQJHU

'URS+DQJHU

5HGXFHU

&URVV

7HH

)OH[LEOH

)LWWLQJ

7HOHVFRSH

)LWWLQJ

r(OERZ

r(OERZ

&ORVXUH

3ODWH

C2536-C

Summary of content (8 pages)

PAGE 1
Feed-Through Wireway Feed-Through NEMA Type 12 Wireway Spec-00323 Feed-Through Wireway, NEMA Type 12 APPLICATION With a variety of fittings and brackets, this traditional-design wireway is suitable for a broad range of industrial applications.
PAGE 2
Feed-Through Wireway Feed-Through NEMA Type 12 Wireway Standard Product Selection Matrix Description 12.00-in. (305-mm) Straight Section 24.00-in. (610-mm) Straight Section 36.00-in. (914-mm) Straight Section 48.00-in. (1219-mm) Straight Section 60.00-in. (1524-mm) Straight Section 120.00-in. (3048-mm) Straight Section 90° Elbow 45° Elbow 22.50° Elbow Cross Closure Plate Tee Telescope Fitting Cutoff Fitting Swivel Nipple (Box Entry) Swivel Nipple (Regular) 1.00-in. (25-mm) Nipple 2.00-in. (51-mm) Nipple 3.
PAGE 3
Feed-Through Wireway Feed-Through NEMA Type 12 Wireway Straight Section Available in lengths from 12.00 in. (305 mm) to 120.00 in. (3048 mm). Bulletin: F20 Straight Section Catalog Number F22W12 F22W24 F22W36 F22W48 F22W60 F22W120 F44W12 F44W24 F44W36 F44W48 F44W60 F44W120 F66W12 F66W24 F66W36 F66W48 F66W60 F66W120 F88W12 F88W24 F88W36 F88W48 F88W60 F88W120 AxBxC in. 2.50 x 2.50 x 12.00 2.50 x 2.50 x 24.00 2.50 x 2.50 x 36.00 2.50 x 2.50 x 48.00 2.50 x 2.50 x 60.00 2.50 x 2.50 x 120.00 4.00 x 4.00 x 12.
PAGE 4
Feed-Through Wireway Feed-Through NEMA Type 12 Wireway Flexible Fitting Isolates a wireway run from shock and vibration. Compensates for misalignment. Used where an odd angle is required (but not to exceed 90 degrees). Permits movement of a machine or control station connected to a wireway run. Hypalon bellow with steel flanges. Bulletin: F20 Catalog Number F22WFF AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.
PAGE 5
Feed-Through Wireway Feed-Through NEMA Type 12 Wireway 22.50-Degree Elbow Bulletin: F20 H in./mm 3.26 83 4.13 105 5.15 131 6.35 161 AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 Catalog Number F22WE225 F44WE225 F66WE225 F88WE225 All dimensions are to outside surfaces. Allow .12 in. (3 mm) additional for gasket at joints. Certified by Canadian Standards Association. 45-Degree Elbow Bulletin: F20 Catalog Number F22WE45 F44WE45 F66WE45 F88WE45 H in.
PAGE 6
Feed-Through Wireway Feed-Through NEMA Type 12 Wireway Closure Plate Used to seal the end on a wireway section or run. Bulletin: F20 D in./mm 3.88 99 5.38 137 7.62 194 9.62 244 Catalog Number F22WP F44WP F66WP F88WP E in./mm 3.88 99 5.38 137 7.62 194 9.62 244 All dimensions are to outside surfaces. Allow .12 in. (3 mm) additional for gasket at joints. Certified by Canadian Standards Association. Reducer Bushings Edge Hole Used to reduce to a smaller wireway size.
PAGE 7
Feed-Through Wireway Feed-Through NEMA Type 12 Wireway Swivel Nipples Box Entry Allows wireway run to be adjusted to any angle. Regular type is used between adjacent wireway sections or fittings while the box entry type is used when entering an enclosure. Catalog Number F22WSA F44WSA F66WSA F88WSA Bulletin: F20 Regular AxB in. 2.50 x 2.50 4.00 x 4.00 6.00 x 6.00 8.00 x 8.00 AxB mm 64 x 64 102 x 102 152 x 152 203 x 203 All dimensions are to outside surfaces. Allow .12 in.
PAGE 8
Feed-Through Wireway Feed-Through NEMA Type 12 Wireway Barrier Kits Three-Compartment Brackets Divides wireway into two or three compartments. Plated spring steel brackets hold barriers in place by friction fit inside wireway. Order barrier and bracket separately. Recommended spacing increments of 3 ft. W = 3.00 in. (76 mm) for 4.00 x 4.00 in. (102 x 102 mm) W = 4.50 in. (114 mm) for 6.00 x 6.00 in. (152 x 152 mm) Catalog Number F44BB3C F66BB3C W (in.) 3.00 4.