Cut Sheet

ManualsBrandsnVent Hoffman ManualsBoxes & EnclosuresFree Stand Enclosure, 1D, 4X, 74x40x19

FLOORMOUNT AND FREESTAND ENCLOSURES Floor-Mount and Free-Stand encloSureS

nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICESTAINLESS STEEL1

Spec-01073 D

Spec-01073

FS66S GLOBAL FREESTAND SINGLE AND DUAL ACCESS, TYPE 4X

INDUSTRY STANDARDS

UL 508A Listed; Type 3R, 4, 4X, 12; File No. E61997

cUL Listed per CSA C22.2 No 94; Type 3R, 4, 4X, 12; File No.

E61997

NEMA/EEMAC Type 3, 3R, 4, 4X, 12, 13

E.I.A. RS-310-D

IEC 60529, IP66,

IEC 62208

Meets NEMA Type 3RX requirements

APPLICATION

These enclosures are used in harsh industrial environments to

house large components such as motor starters, drives, contactors

and PLCs as well as a wide range of other electrical and electric

equipment. A modular interior rail system (PROLINE) provides an

extensive range of mounting options. Whether your application

calls for rack mounting, panel mounting or grid system mounting, a

combination of PROLINE components can deliver the right solution

for ultimate equipment mounting flexibility and convenience. Three-

point latching and sealing provide industry-leading protection from

dust, oil and water. The FS66S enclosures are used extensively

in oil and gas, water/wastewater, petrochemical and power

plant environments and offer a perfect solution to outdoor DCS

applications.

Four styles are available to provide maximum flexibility:

1. One-Door Single-Access Enclosures (single door on front)

2. One-Door Dual-Access Enclosures (single door on front and

rear)

3. Two-Door Single-Access Enclosures (doors close on a

removable centerpost)

4. Two-Door Dual-Access Enclosures (doors close on a

removable centerpost on front and rear)

Each style is also offered in 304 or 316L stainless steel, and can

be manufactured as standard duty (14 gauge) and heavy duty (12

gauge).

SPECIFICATIONS

• Internal grid mounting system and PROLINE frame compatible

for easy and fast panel installation

• Enclosure with contents to support Standard Duty 500Kg (1102

lb.) evenly distributed and Heavy Duty 1000Kg (2205 lb.) evenly

distributed

• Uni-body design with seams continuously welded and ground

smooth

• Two-door enclosures provided with a removable centerpost for

easy panel installation

• Heavy-duty stainless steel lifting eyes

• Heavy-duty three-point latching mechanism operated by 316L

stainless steel POWERGLIDE padlocking handle

• Seamless foam-in-place gasket assures a water-tight and dust-

tight seal

• Body flange trough collar channels liquids and contaminants

away from door opening and installed equipment

• Removable hidden hinges

• Built-in plinth base that allows for flexible cable entry

• Gland plate on the bottom offers cable entry options

• Painted or galvanized back panels can be rear-mounted in

single-access enclosures and back-to-back in dual access

enclosures

• Bonding provision on door

FINISH

Enclosures are unpainted. Cover, sides, top and bottom have

smooth #4 brushed finish.

ACCESSORIES

Steel, Stainless Steel and Non-Metallic Window Kits

Thermoplastic Data Pocket

Full Subpanel

Stop Arm Kit

Large-Volume ATEX Purge System Type Y, Z and Ex [pz]

MODIFICATION AND CUSTOMIZATION

Hoffman excels at modifying and customizing products to

your specifications. Contact your local Hoffman sales office or

distributor for complete information.

Bulletin: FS66S

Summary of content (24 pages)

PAGE 1
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures Spec-01073 FS66S Global Free-Stand Single and Dual Access, Type 4X INDUSTRY STANDARDS SPECIFICATIONS UL 508A Listed; Type 3R, 4, 4X, 12; File No. E61997 cUL Listed per CSA C22.2 No 94; Type 3R, 4, 4X, 12; File No. E61997 NEMA/EEMAC Type 3, 3R, 4, 4X, 12, 13 E.I.A.
PAGE 2
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures Standard Product One-Door, Single-Access Enclosures Catalog Number FS180654SSP0 Nominal AxBxCA x B x C 1800x600x500 FS180654SHP0 1800x600x500 FS180656SSP0 1800x600x500 FS180656SHP0 1800x600x500 FS181054SSP0 1800x1000x500 FS181054SHP0 1800x1000x500 FS181056SSP0 1800x1000x500 FS181056SHP0 1800x1000x500 FS200884SSP0 2000x800x800 FS200884SHP0 2000x800x800 FS200886SSP0 2000x800x800 FS200886SHP0 2000x800x800 AxBxC
PAGE 3
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures Standard Product One-Door, Dual Access Enclosures Catalog Number FS180654DSP0 Nominal AxBxC 1800x600x500 FS180654DHP0 1800x600x500 FS1800656DSP0 1800x600x500 FS180656DHP0 1800x600x500 FS181054DSP0 1800x1000x500 FS181054DHP0 1800x1000x500 FS181056DSP0 1800x1000x500 FS181056DHP0 1800x1000x500 FS200884DSP0 2000x800x800 FS200884DHP0 2000x800x800 FS200886DSP0 2000x800x800 FS200886DHP0 2000x800x800 AxBxC in.
PAGE 4
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures Standard Product Two-Door, Single Access Enclosures Catalog Number FS201284SSP0 Nominal AxBxC 2000x1200x800 FS201284SHP0 2000x1200x800 FS201286SSP0 2000x1200x800 FS201286SHP0 2000x1200x800 AxBxC in./mm 81.79 x 47.89 x 30.87 2078 x 1216 x 784 81.84 x 47.94 x 30.92 2079 x 1218 x 785 81.79 x 47.89 x 30.87 2078 x 1216 x 784 81.84 x 47.94 x 30.
PAGE 5
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures Standard Product Two-Door, Dual Access Enclosures Catalog Number FS201284DSP0 Nominal AxBxC 2000x1200x800 FS201284DHP0 2000x1200x800 FS201286DSP0 2000x1200x800 FS201286DHP0 2000x1200x800 AxBxC in./mm 81.79 x 47.89 x 31.97 2078 x 1216 x 812 81.79 x 47.97 x 32.07 2078 x 1218 x 815 81.79 x 47.89 x 32.02 2078 x 1216 x 813 81.84 x 47.94 x 32.
PAGE 6
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures FS66S Panel, Rack and Grid Mounting Accessories FS66S enclosures utilize PROLINE internal components to provide an extensive range of mounting options. Whether your application calls for rack mounting, panel mounting or grid system mounting, a combination of PROLINE components can deliver the right solution. Panel Mounting A complete range of panel mounting options makes optimum use of internal enclosure space.
PAGE 7
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures Full Subpanel • • • • • • ll necessary mounting hardware is included A Subpanels are 12 gauge (2.
PAGE 8
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures Partial Subpanel Partial Subpanels are 12 gauge steel, have flanges on four sides and are painted white. Panels can be positioned vertically in 25mm increments and also can be positioned at any depth in 25-mm increments using the optional grid straps. Conductive subpanels are unpainted galvanized steel. All necessary mounting hardware is included.
PAGE 9
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures Swing-Out Panel Swing-Out Panels allow a front-mounted panel to pivot out of an enclosure frame opening. This accessory includes a white panel and all the necessary hardware.
PAGE 10
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures PROLINE Fastener Packages Use to fasten components to the grid system. PGF Packages include 20 front-loading clip nuts (M6) and 20 combination-drive washer-head bolts (M6). Grounding Package is used with the rectangular holes in the PROLINE frame to provide electrical continuity between the frame and the grid system. ASM5T Package is used with PROLINE frames having round holes. Package includes 20 M5 self-tapping screws.
PAGE 11
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures Wire Management Rails Wire Management Rails are 14 gauge steel with a plated finish. They feature a unique hole pattern that allows either wire ties or fasteners to secure wires in place. Frame-mounting hardware is included. One package contains 20 rails. Bulletin: P20 Catalog Number PWMR4 PWMR5 PWMR6 PWMR8 PWMR9 L (mm) 304 404 504 704 775 Fits Frame Depth 400 500 600 800 900 L (in.) 12.0 15.9 19.8 27.7 30.
PAGE 12
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures Grid Straps Grid Straps are 14 gauge plated steel. They are provided with specially designed rectangular holes to allow the use of cage nuts or front-loading cage nuts. Mounting holes are provided on 25-mm centers. Grid Straps are available with either 1 row or 3 rows of holes and are furnished in pairs. Mounting hardware to attach Grid Straps to the frame or to other Grid Straps is included.
PAGE 13
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures Partial Swing-Out Rack Frame SPECIFICATIONS • • urnished with hinges, two quarter-turn latches and mounting F hardware Complies with ANSI/EIA RS-310-D rack mounting standards 1. Swing-Out Rack Frame assemblies are supplied with mounting supports. Swing-Out Rack Frames can also be installed in right, left or both bays of 1200-mm wide frames using center uprights. 2.
PAGE 14
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures Heavy-Duty Swing-Out Rack Frame • • • • • • • • • llows 19-in. rack equipment to pivot out of the enclosure frame A for better accessibility. The frames mount on hinges capable of 120-degree rotation. Hinges that provide 170-degree rotation are optional.
PAGE 15
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures 15 Stainless Steel Spec-01073 D SUBJECT TO CHANGE WITHOUT NOTICE nVent.
PAGE 16
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures 170-Degree Hinge Kit Bulletin: P20 Use this kit in conjunction with the Heavy-Duty Swing-Out Frame. It provides increased accessibility to the back of rack equipment. Catalog Number PSF170K nVent.com/HOFFMAN PH 763.422.
PAGE 17
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures Swing-Out Guides Guides can be mounted to a Heavy-Duty Swing-Out Rack Frame to provide extra support for rack equipment. Plated steel guides are furnished in pairs with mounting hardware included.
PAGE 18
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures Frame Pull-Out Shelf Frame Pull-Out Shelf allows easy access to shelf-mounted devices. The shelf is 16 gauge steel with 12 gauge steel supports. The entire assembly is finished with RAL 7035 textured gray polyester powder paint. The shelf mounts to the front and rear frame uprights. Load rating is 110 lb. (50 kg). Catalog Number PFSHP66 PFSHP68 PFSHP86 PFSHP88 D (mm) 461 661 461 661 D (in.) 18.15 26.02 18.15 26.
PAGE 19
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures Door-Activated Light Switch Kit Door-activated switch mounts to the frame and includes mounting hardware. Mounting plate is 14 gauge steel with a plated finish. Catalog Number PLFSWD Description Door-activated light switch kit Bulletin: P20 19-in. Rack Angles 19-in. U-Shaped Rack Angles are available in square-hole and tappedhole designs. Tapped Rack Angles are 12 gauge plated steel with 10-32 tapped holes.
PAGE 20
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures 24-in. Rack Angles 24-in. Rack Angles are available in both square-hole and tapped-hole designs. Tapped Rack Angles are 12 gauge plated steel with 10-32 tapped holes. Square-Hole Rack Angles are 14 gauge plated steel designed to accept metric or English cage nuts. 24-in. Rack Angles fit directly into 700- or 800-mm wide frames using Frame Reducing Brackets.
PAGE 21
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures Metric Rack Angles Metric U-Shaped Rack Angles are available with square holes spaced vertically in 25-mm increments to accept metric or English cage nuts. These Rack Angles are built in accordance with standard IEC 917-2-1 to accommodate metric subracks. They are sized to fit directly into 600-mm wide frames. Use Frame Reducing Brackets to mount in 700- or 800-mm wide frames.
PAGE 22
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures Rack Panels Rack Panels are available in aluminum and painted steel. Aluminum Rack Panels are .125-in.-thick 5052-H32 alloy. Steel Rack Panels are 12 gauge steel and finished in RAL 7035 textured light-gray polyester powder paint. All panels are flat with oblong holes positioned at EIA standard spacing. Mounting hardware is sold separately.
PAGE 23
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures Frame-Reducing Brackets for Frames or Grid Straps Frame-Reducing Brackets mount directly to 700- or 800-mm wide PROLINE frames or to grid straps. Converts wider frames to 600mm wide, allowing 19-in. rack angles to fit, or to 700-mm wide, allowing 23-in. rack angles to fit. Can be used to left- or right-justify the rack-mounted equipment. Furnished in sets of four. 14 gauge plated steel. Mounting hardware is included.
PAGE 24
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures Slides Heavy-duty ball bearing, plated, three-section Slides are 16-in. (406-mm) long and allow 17-in. (423-mm) extension. They are attached to supports that mount between two pairs of rackmounting angles that have accessory mounting legs. Mounting hardware is furnished. Equipment 16.75-in. (425-mm) wide can be mounted between Slide assemblies installed on 19-in. rack angles. A pair of Slides can support up to 160 lb.