Cut Sheet
INTERSAFE DATA INTERFACE PORTS INTERSAFE DATA INTERFAcE PoRTS, TyPE 4/4X/12
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEACCESSORIES1
Spec-00131 W
Spec-00131
INTERSAFE DATA INTERFACE PORTS, TYPE 4/4X/12
INDUSTRY STANDARDS
Mild Steel Painted Ports
UL 508A Component Recognized; Type 4, 12; File No. E61997
cUL Component Recognized per CSA C22.2 No 94; Type 4, 12; 
File No. E61997
NEMA/EEMAC Type 4, 12
IEC 60529, IP66
Stainless Steel Ports
UL 508A Component Recognized; Type 4, 4X, 12; File No. 
E61997
cUL Component Recognized per CSA C22.2 No 94; Type 4, 4X, 
12; File No. E61997
NEMA/EEMAC Type 4, 4X, 12
IEC 60529, IP66
Clear-Cover (polycarbonate) Ports
UL 508A Component Recognized; Type 4X, 12; File No. 
E61997 
cUL Component Recognized per CSA C22.2 No 94; Type 4, 4X, 
12; File No. E61997
IEC 60529, IP66
APPLICATION
INTERSAFE Data Interface Ports are mounted on an enclosure to 
allow programming access to devices inside without opening the 
enclosure door.
FEATURES
•  Ready to use
•  Frame and door assembly with aluminum back plate included 
with all models; 120 VAC receptacles and programming 
connectors are mounted to the plate in 40 standard 
configurations
•  All standard configurations include a GFCI or standard duplex 
receptacle with a 5-A circuit breaker for added safety
•  Door gasket (between the door and plate assemblies) and plate 
gasket (between the plate assembly and the enclosure) together 
provide a tight seal
•  Template provided for accurate enclosure cutout dimensions
•  Quarter-turn latch with screwdriver slot and padlock hasp on 
all steel and stainless steel door models for convenience and 
security
•  Quarter-turn latch with screwdriver slot on polycarbonate 
models
•  Disk drive enclosure provides access to one or two customer-
supplied disk drives without opening the cabinet
•  Modifications and customization available to accommodate a 
wide variety of additional connectors
SPECIFICATIONS
•  Door assembly and frame manufactured from 16 gauge steel or 
stainless steel
•  Clear-cover models have a molded polycarbonate door
•  Steel and stainless steel doors are welded and ground
•  Back plate is aluminum
FINISH
•  RAL 9005 black fine-textured polyester powder coating—mild 
steel door assemblies
•  Brushed finish—stainless steel door assemblies
•  Brushed finish—aluminum back plates
MODIFICATION AND CUSTOMIZATION
Hoffman excels at modifying and customizing products to 
your specifications. Contact your local Hoffman sales office or 
distributor for complete information.










